AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review | Open Access

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Guiwu LIUa( )Xiangzhao ZHANGaJian YANGaGunjun QIAOa,b
School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China
State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China
Show Author Information

Abstract

Silicon carbide (SiC) has been widely concerned for its excellent overall mechanical and physical properties, such as low density, good thermal-shock behavior, high temperature oxidation resistance, and radiation resistance; as a result, the SiC-based materials have been or are being widely used in most advanced fields involving aerospace, aviation, military, and nuclear power. Joining of SiC-based materials (monolithic SiC and SiCf/SiC composites) can resolve the problems on poor processing performance and difficulty of fabrication of large-sized and complex-shaped components to a certain extent, which are originated from their high inherent brittleness and low impact toughness. Starting from the introduction to SiC-based materials, joining of ceramics, and joint strength characterization, the joining of SiC-based materials is reviewed by classifying the as-received interlayer materials, involving no interlayer, metallic, glass-ceramic, and organic interlayers. In particular, joining processes (involving joining techniques and parameter conditions), joint strength, interfacial microstructures, and/or reaction products are highlighted for understanding interfacial behavior and for supporting development of application-oriented joining techniques.

References

[1]
XG Zhou, HL Wang, S Zhao. Progress of SiCf/SiC composites for nuclear application. Adv Ceram 2016, 37: 151-167.
[2]
MW Chen, WJ Xie, HP Qiu. Recent progress in continuous SiC fiber SiC ceramic matrix composites. Adv Ceram 2016, 37: 393-402.
[3]
GW Liu, GJ Qiao, HJ Wang, et al. Pressureless brazing of zirconia to stainless steel with Ag-Cu filler metal and TiH2 powder. J Eur Ceram Soc 2008, 28: 2701-2708.
[4]
GW Liu, GJ Qiao, HJ Wang, et al. Bonding mechanisms and shear properties of alumina ceramic/stainless steel brazed joint. J Mater Eng Perform 2011, 20: 1563-1568.
[5]
HJ Liu, JC Feng, YY Qian. Interface structure and formation mechanism of diffusion-bonded joints of SiC ceramic to TiAl-based alloy. Scripta Mater 2000, 43: 49-53.
[6]
C Zhang, G Qiao, Z Jin. Active brazing of pure alumina to Kovar alloy based on the partial transient liquid phase (PTLP) technique with Ni-Ti interlayer. J Eur Ceram Soc 2002, 22: 2181-2186.
[7]
S Li, H Duan, S Liu, et al. Interdiffusion involved in SHS welding of SiC ceramic to itself and to Ni-based superalloy. Int J Refract Met H 2000, 18: 33-37.
[8]
MB Uday, MN Ahmad Fauzi, H Zuhailawati, et al. Effect of welding speed on mechanical strength of friction welded joint of YSZ-alumina composite and 6061 aluminum alloy. Mat Sci Eng A 2011, 528: 4753-4760.
[9]
F Döhler, T Zscheckel, S Kasch, et al. A glass in the CaO/MgO/Al2O3/SiO2 system for the rapid laser sealing of alumina. Ceram Int 2017, 43: 4302-4308
[10]
M Singh. A reaction forming method for joining of silicon carbide-based ceramics. Scripta Mater 1997, 37: 1151-1154.
[11]
W Krenkel, T Henke, N Mason. In-situ joined CMC components. Key Eng Mater 1996, 127: 313-320.
[12]
Y Katoh, LL Snead, T Cheng, et al. Radiation-tolerant joining technologies for silicon carbide ceramics and composites. J Nucl Mater 2014, 448: 497-511.
[13]
M Ferraris, M Salvo, V Casalegno, et al. Torsion tests on AV119 epoxy-joined SiC. Int J Appl Ceram Technol 2012, 9: 795-807.
[14]
M Ferraris, A Ventrella, M Salvo, et al. Shear strength measurement of AV119 epoxy-joined SiC by different torsion tests. Int J Appl Ceram Technol 2014, 11: 394-401.
[15]
X Zhang, G Liu, J Tao, et al. Brazing of WC-8Co cemented carbide to steel using Cu-Ni-Al alloys as filler metal: Microstructures and joint mechanical behavior. J Mater Sci Technol 2018, 34: 1180-1188.
[16]
X Zhang, Z Huang, G Liu, et al. Wetting and brazing of Ni-coated WC-8Co cemented carbide using the Cu-19Ni-5Al alloy as filler metal: Microstructural evolution and joint mechanical properties. J Mater Res 2018, 33: 1671-1680.
[17]
M Salvo, S Rizzo, V Casalegno, et al. Shear and bending strength of SiC/SiC joined by a modified commercial adhesive. Int J Appl Ceram Technol 2012, 9: 778-785.
[18]
M Ferraris, M Salvo, V Casalegno, et al. Joining of machined SiC/SiC composites for thermonuclear fusion reactors. J Nucl Mater 2008, 375: 410-415.
[19]
SJ Li, WH Liu, YH Lu, et al. Joining of pressureless sintered SiC using polysiloxane SR355 with active additive Ni nanopowder. Acta Mater Compos Sin 2008, 25: 72-76.
[20]
H Dong, S Li, Y Teng, et al. Joining of SiC ceramic-based materials with ternary carbide Ti3SiC2. Mat Sci Eng B 2011, 176: 60-64.
[21]
SJ Li, Y Zhou, HP Duan, et al. Joining of SiC ceramic to Ni-based superalloy with functionally gradient material fillers and a tungsten intermediate layer. J Mater Sci 2003, 38: 4065-4070.
[22]
HY Dong, SJ Li, YH He. Joining of reaction bonded SiC ceramic using Ti3SiC2 powder as filler. Chin J Nonfer Metal 2005, 15: 1051-1056.
[23]
R Aroshas, I Rosenthal, A Stern, et al. Silicon carbide diffusion bonding by spark plasma sintering. Mater Manuf Process 2015, 30: 122-126.
[24]
S Grasso, P Tatarko, S Rizzo, et al. Joining of β-SiC by spark plasma sintering. J Eur Ceram Soc 2014, 34: 1681-1686.
[25]
T Okuni, Y Miyamoto, H Abe, et al. Joining of silicon carbide and graphite by spark plasma sintering. Ceram Int 2014, 40: 1359-1363.
[26]
H Kishimoto, T Shibayama, T Abe, et al. Diffusion bonding technology of tungsten and SiC/SiC composites for nuclear applications. IOP Conf Ser: Mater Sci 2011, 18: 162015
[27]
H Kishimoto, T Shibayama, K Shimoda. Microstructural and mechanical characterization of W/SiC bonding for structural material in fusion. J Nucl Mater 2011, 417: 387-390.
[28]
G Matsuo, T Shibayama, H Kishimoto, et al. Micro-chemical analysis of diffusion bonded W-SiC joint. J Nucl Mater 2011, 417: 391-394.
[29]
Z Zhong, T Hinoki, A Kohyama. Microstructure and mechanical strength of diffusion bonded joints between silicon carbide and F82H steel. J Nucl Mater 2011, 417: 395-399.
[30]
H Pan, I Itoh, M Matsubara. Mechanical properties of diffusion bonding joint of SiC and Al-Sn alloys at elevated temperatures. Mater Trans 2001, 42: 2543-2547.
[31]
GG Sozhamannan, SB Prabu. Influence of interface compounds on interface bonding characteristics of aluminium and silicon carbide. Mater Charact 2009, 60: 986-990.
[32]
GG Sozhamannan, S Balasivanandha Prabu. Evaluation of interface bonding strength of aluminum/silicon carbide. Int J Adv Manuf Technol 2009, 44: 385-388.
[33]
F Valenza, S Gambaro, ML Muolo, et al. Wetting of SiC by Al-Ti alloys and joining by in-situ formation of interfacial Ti3Si(Al)C2. J Eur Ceram Soc 2018, 38: 3727-3734.
[34]
Z Zhang, J Huang, H Zhang, et al. Microstructures of Si/SiC ceramic and invar alloy brazing joint. Rare Metal Mater Eng 2009, 38: 493-496.
[35]
HT Zhao, JH Huang, H Zhang, et al. Vacuum brazing of Si/SiC ceramic and low expansion titanium alloy by using Cu-Ti fillers. Rare Metal Mater Eng 2007, 36: 2184-2188.
[36]
B Riccardi, CA Nannetti, J Woltersdorf, et al. Brazing of SiC and SiCf/SiC composites performed with 84Si-16Ti eutectic alloy: Microstructure and strength. J Mater Sci 2002, 37: 5029-5039.
[37]
B Riccardi, CA Nannetti, J Woltersdorf, et al. Joining of SiC based ceramics and composites with Si-16Ti and Si-18Cr eutectic alloys. Int J Mater Prod Technol 2004, 20: 440-451.
[38]
JK Li, L Liu, X Liu. Joining of SiC ceramic by 22Ti-78Si high-temperature eutectic brazing alloy. J Inorg Mater 2011, 26: 1314-1318.
[39]
K Nagatsuka, Y Sechi, K Nakata. Dissimilar joint characteristics of SiC and WC-Co alloy by laser brazing. J Phys: Conf Ser 2012, 379: 012047.
[40]
HJ Liu, JC Feng, YY Qian. Microstructure and strength of the SiC/TiAl joint brazed with Ag-Cu-Ti filler metal. J Mater Sci Lett 2000, 19: 1241-1242.
[41]
Y Liu, ZR Huang, XJ Liu. Joining of sintered silicon carbide using ternary Ag-Cu-Ti active brazing alloy. Ceram Int 2009, 35: 3479-3484.
[42]
P Prakash, T Mohandas, PD Raju. Microstructural characterization of SiC ceramic and SiC-metal active metal brazed joints. Scripta Mater 2005, 52: 1169-1173.
[43]
Y Liu, YZ Zhu, Y Yang, et al. Microstructure of reaction layer and its effect on the joining strength of SiC/SiC joints brazed using Ag-Cu-In-Ti alloy. J Adv Ceram 2014, 3: 71-75.
[44]
F Moszner, G Mata-Osoro, M Chiodi, et al. Mechanical behavior of SiC joints brazed using an active Ag-Cu-In-Ti braze at elevated temperatures. Int J Appl Ceram Technol 2017, 14: 703-711.
[45]
H Lv, ZJ Kang, JX Chu, et al. Microstructure and strength of SiC/Nb joint with Cu based brazing filler metal. Trans Chin Weld Inst 2005, 26: 29-31.
[46]
I Südmeyer, T Hettesheimer, M Rohde. On the shear strength of laser brazed SiC-steel joints: Effects of braze metal fillers and surface patterning. Ceram Int 2010, 36: 1083-1090.
[47]
WB Tian, ZM Sun, P Zhang, et al. Brazing of silicon carbide ceramics with Ni-Si-Ti powder mixtures. J Aust Ceram Soc 2017, 53: 511-516.
[48]
HP Xiong, W Mao, YH Xie, et al. Control of interfacial reactions and strength of the SiC/SiC joints brazed with newly-developed Co-based brazing alloy. J Mater Res 2007, 22: 2727-2736.
[49]
HP Xiong, W Mao, YH Xie, et al. Brazing of SiC to a wrought nickel-based superalloy using CoFeNi(Si,B)CrTi filler metal. Mater Lett 2007, 61: 4662-4665.
[50]
XG Chen, RS Xie, ZW Lai, et al. Interfacial structure and formation mechanism of ultrasonic-assisted brazed joint of SiC ceramics with Al-12Si filler metals in air. J Mater Sci Technol 2017, 33: 492-498.
[51]
XG Chen, JC Yan, SC Ren, et al. Ultrasonic-assisted brazing of SiC ceramic to Ti-6Al-4V alloy using a novel AlSnSiZnMg filler metal. Mater Lett 2013, 105: 120-123.
[52]
XG Chen, JC Yan, SC Ren, et al. Microstructure, mechanical properties, and bonding mechanism of ultrasonic-assisted brazed joints of SiC ceramics with ZnAlMg filler metals in air. Ceram Int 2014, 40: 683-689.
[53]
A Koltsov, F Hodaj, N Eustathopoulos. Brazing of AlN to SiC by a Pr silicide: Physicochemical aspects. Mat Sci Eng A 2008, 495: 259-264,
[54]
B Riccardi, CA Nannetti, T Petrisor, et al. Issues of low activation brazing of SiCf/SiC composites by using alloys without free silicon. J Nucl Mater 2004, 329: 562-566.
[55]
HX Li, ZQ Wang, ZH Zhong, et al. Micro-alloying effects of yttrium on the microstructure and strength of silicon carbide joint brazed with chromium-silicon eutectic alloy. J Alloys Compd 2018, 738: 354-362.
[56]
WW Li, B Chen, HP Xiong, et al. Brazing SiC matrix composites using Co-Ni-Nb-V alloy. Weld World 2017, 61: 839-846.
[57]
YW Mao, SJ Li, WB Han. Joining of SiC by high temperature brazing with Ni-51Cr filler. Rare Metal Mater Eng 2006, 35: 312-315.
[58]
YW Mao, SJ Li, WB Han. Joining of recrystallized SiC ceramic using Ni-Cr-Nb powders as filler. Rare Metal Mater Eng 2009, 38: 276-279.
[59]
B Chen, HP Xiong, W Mao, et al. Microstructures and property of SiC/SiC joints brazed with PdNi-Cr-V brazing filler. Acta Metall Sin 2007, 43: 1181-1185.
[60]
Q Wang, QH Li, DL Sun, et al. Microstructure and mechanical properties of SiC/Ti diffusion bonding joints under electric field. Rare Metal Mater Eng 2016, 45: 1749-1754.
[61]
YI Jung, JH Park, HG Kim, et al. Effect of Ti and Si interlayer materials on the joining of SiC ceramics. Nucl Eng Technol 2016, 48: 1009-1014.
[62]
BV Cockeram. Flexural strength and shear strength of silicon carbide to silicon carbide joints fabricated by a molybdenum diffusion bonding technique. J Am Ceram Soc 2005, 88: 1892-1899.
[63]
JH Kim, DS Kim, ST Lim, et al. Interfacial microstructure of diffusion-bonded SiC and Re with Ti Interlayer. J Alloys Compd 2017, 701: 316-320.
[64]
A Kurumada, Y Imamura, Y Tomota, et al. Evaluation of the integrity of divertor models of tungsten or SiC/SiC composites joined with copper. J Nucl Mater 2003, 313: 245-249.
[65]
XQ Ji, SJ Li, TY Ma, et al. Joining of SiC ceramic to Ni-based superalloy with Zr/Nb multiple interlayers. J Chin Ceram Soc 2002, 30: 305-310.
[66]
K Tenyama, M Maeda, T Shibayanagi, et al. Interfacial microstructure of silicon carbide and titanium aluminide joints produced by solid-state diffusion bonding. Mater Trans 2004, 45: 2734-2739.
[67]
HJ Liu, JC Feng. Diffusion bonding of SiC ceramic to TiAl-based alloy. J Mater Sci Lett 2001, 20: 815-817.
[68]
JC Feng, HJ Liu, M Naka, et al. Interface structure and formation mechanism of diffusion-bonded SiC/Ni-Cr joint. J Mater Sci Lett 2001, 20: 301-302.
[69]
JC Feng, HJ Liu, M Naka, et al. Reaction products and growth kinetics during diffusion bonding of SiC ceramic to Ni-Cr alloy. Mater Sci Technol 2003, 19: 137-142.
[70]
JQ Li, GM Zhu, P Xiao. Joining reaction-bonded silicon carbide using Inconel 600 superalloy. J Mater Sci Lett 2003, 22: 759-761.
[71]
ZH Zhong, T Hinoki, A Kohyama, et al. Joining of silicon carbide to ferritic stainless steel using a W-Pd-Ni interlayer for high-temperature applications. Int J Appl Ceram Technol 2010, 7: 338-347.
[72]
HX Li, ZH Zhong, HB Zhang, et al. Microstructure characteristic and its influence on the strength of SiC ceramic joints diffusion bonded by spark plasma sintering. Ceram Int 2018, 44: 3937-3946.
[73]
GW Liu, ML Muolo, F Valenza, et al. Survey on wetting of SiC by molten metals. Ceram Int 2010, 36: 1177-1188.
[74]
NRJ Hynes, PS Velu, R Kumar, et al. Investigate the influence of bonding temperature in transient liquid phase bonding of SiC and copper. Ceram Int 2017, 43: 7762-7767.
[75]
GW Liu, F Valenza, ML Muolo, et al. SiC/SiC and SiC/Kovar joining by Ni-Si and Mo interlayers. J Mater Sci 2010, 45: 4299-4307.
[76]
JJ Zhang, SJ Li, HP Duan, et al. Effects of technological parameters on the joining strength of SiC ceramic by hot pressing reaction welding. Rare Metal Mater Eng 2003, 32: 542-545.
[77]
HP Duan, SJ Li, YG Zhang, et al. Investigation on welding process of SiC ceramic with Ni-based superalloy using Gleeble 1500 thermo-mechanical testing machine. Chin J Rare Metal 1999, 23: 326-329.
[78]
YC Lin, PJ McGinn, AS Mukasyan. High temperature rapid reactive joining of dissimilar materials: Silicon carbide to an aluminum alloy. J Eur Ceram Soc 2012, 32: 3809-3818.
[79]
PK Gianchandani, V Casalegno, F Smeacetto, et al. Pressure-less joining of C/SiC and SiC/SiC by a MoSi2/Si composite. Int J Appl Ceram Technol 2017, 14: 305-312.
[80]
GB Lin, JH Huang, JG Zhang, et al. Microstructure of reactive composite brazing joints of SiC ceramics and Ti alloy by using Ag-Cu-Ti-(Ti+C) as bonding material. Chin J Nonfer Metal 2005, 15: 1326-1331.
[81]
XY Dai, J Cao, Z Chen, et al. Brazing SiC ceramic using novel B4C reinforced Ag-Cu-Ti composite filler. Ceram Int 2016, 42: 6319-6328.
[82]
XY Dai, J Cao, YT Tian, et al. Effect of holding time on microstructure and mechanical properties of SiC/SiC joints brazed by Ag-Cu-Ti+B4C composite filler. Mater Charact 2016, 118: 294-301.
[83]
Q Ma, ZR Li, ZY Wang, et al. Relieving residual stress in brazed joint between SiC and Nb using a 3D-SiO2-fiber ceramic interlayer. Vacuum 2018, 149: 93-95.
[84]
Y Liu, Q Qi, YZ Zhu, et al. Microstructure and joining strength evaluation of SiC/SiC joints brazed with SiCp/Ag-Cu-Ti hybrid tapes. J Adhes Sci Technol 2015, 29: 1563-1571.
[85]
YW Mao, SJ Li, LS Yan. Joining of SiC ceramic to graphite using Ni-Cr-SiC powders as filler. Mat Sci Eng A 2008, 491: 304-308.
[86]
WB Tian, H Kita, N Kondo, et al. Effect of composition and joining parameters on microstructure and mechanical properties of silicon carbide joints. J Ceram Soc Jpn 2010, 118: 799-804.
[87]
WB Tian, H Kita, H Hyuga, et al. Reaction joining of SiC ceramics using TiB2-based composites. J Eur Ceram Soc 2010, 30: 3203-3208.
[88]
WB Tian, H Kita, H Hyuga, et al. Joining of SiC by Al infiltrated TiC tape: Effect of joining parameters on the microstructure and mechanical properties. J Eur Ceram Soc 2012, 32: 149-156.
[89]
R Rosa, P Veronesi, S Han, et al. Microwave assisted combustion synthesis in the system Ti-Si-C for the joining of SiC: Experimental and numerical simulation results. J Eur Ceram Soc 2013, 33: 1707-1719.
[90]
Y Katoh, M Kotani, A Kohyama, et al. Microstructure and mechanical properties of low-activation glass-ceramic joining and coating for SiC/SiC composites. J Nucl Mater 2000, 283: 1262-1266.
[91]
M Ferraris, M Salvo, V Casalegno, et al. Joining of SiC-based materials for nuclear energy applications. J Nuc Mater 2011, 417: 379-382.
[92]
M Ferraris, M Salvo, S Rizzo, et al. Torsional shear strength of silicon carbide components pressurelessly joined by a glass-ceramic. Int J Appl Ceram Technol 2012, 9: 786-794.
[93]
M Ferraris, A Ventrella, M Salvo, et al. Torsional shear strength tests for glass-ceramic joined silicon carbide. Int J Appl Ceram Technol 2015, 12: 693-699.
[94]
W Lippmann, J Knorr, R Wolf, et al. Laser joining of silicon carbide—a new technology for ultra-high temperature resistant joints. Nucl Eng Des 2004, 231: 151-161.
[95]
M Herrmann, W Lippmann, A Hurtado. High-temperature stability of laser-joined silicon carbide components. J Nucl Mater 2013, 443: 458-466.
[96]
M Ferraris, V Casalegno, S Rizzo, et al. Effects of neutron irradiation on glass ceramics as pressure-less joining materials for SiC based components for nuclear applications. J Nucl Mater 2012, 429: 166-172.
[97]
S Schaafhausen, FD Börner, T Chand, et al. Corrosion of laser joined silicon carbide in gasification environment. Adv Appl Ceram 2015, 114: 350-360.
[98]
M Herrmann, W Lippmann, A Hurtado. Y2O3-Al2O3- SiO2-based glass-ceramic fillers for the laser-supported joining of SiC. J Eur Ceram Soc 2014, 13:1935-1948.
[99]
SW Fan, JL Liu, X Ma, et al. Microstructure and properties of SiCf/SiC joint brazed by Y-Al-Si-O glass. Ceram Int 2018, 44: 8656-8663.
[100]
S Ahmad, M Herrmann, MM Mahmoud, et al. Application of Nd2O3-Al2O3-SiO2 glass solder for joining of silicon carbide components. J Eur Ceram Soc 2016, 36: 1559-1569.
[101]
M Herrmann, S Ahmad, W Lippmann, et al. Rare earth (RE: Nd, Dy, Ho, Y, Yb, and Sc) aluminosilicates for joining silicon carbide components. Int J Appl Ceram Technol 2017, 14: 675-691.
[102]
ZH Luo, DL Jiang, JX Zhang, et al. Investigation of interfacial bonding between Na2O-B2O3-SiO2 solder and silicon carbide Substrate. Sci Technol Weld Joining 2011, 16: 592-596.
[103]
ZH Luo, DL Jiang, JX Zhang, et al. Joining of sintered silicon carbide ceramics using sodium borosilicate glass as the solder. Int J Appl Ceram Technol 2012, 9: 742-750.
[104]
ZH Luo, DL Jiang, JX Zhang, et al. Thermal shock behavior of the SiC-SiC joints joined with Na2O-B2O3- SiO2 glass solder. J Inorg Mater 2012, 27: 234-238.
[105]
HC Jung, YH Park, JS Park, et al. R&D of joining technology for SiC components with channel. J Nucl Mater 2009, 386-388: 847-851.
[106]
HC Jung, T Hinoki, Y Katoh, et al. Development of a shear strength test method for NITE-SiC joining material. J Nucl Mater 2011, 417: 383-386.
[107]
HK Yoon, HC Jung, T Hinoki, et al. Characteristics of shear strength for joined SiC-SiC ceramics. Trans Korean Soc Mech Eng A 2014, 38: 483-487.
[108]
WB Tian, H Kita, H Hyuga, et al. Joining of SiC by tape-cast SiC-Al2O3-Y2O3 interlayer. Key Eng Mater 2011, 484: 26-31.
[109]
HY Dong, YD Yu, XL Jin, et al. Microstructure and mechanical properties of SiC-SiC joints joined by spark plasma sintering. Ceram Int 2016, 42: 14463-14468.
[110]
XB Zhou, YH Han, XF Shen, et al. Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology. J Nucl Mater 2015, 466: 322-327.
[111]
P Tatarko, Z Chlup, A Mahajan, et al. High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding. J Eur Ceram Soc 2017, 37: 1205-1216.
[112]
CH Henager, RJ Kurtz. Low-activation joining of SiC/SiC composites for fusion applications. J Nucl Mater 2011, 417: 375-378.
[113]
CH Henager, Y Shin, Y Bium, et al. Coatings and joining for SiC and SiC-composites for nuclear energy systems. J Nucl Mater 2007, 367: 1139-1143.
[114]
YD Yu, HY Dong, BL Ma, et al. Effect of different filler materials on the microstructure and mechanical properties of SiC-SiC joints joined by spark plasma sintering. J Alloys Compd 2017, 708: 373-379.
[115]
AF Zhang, YC Chen, ZQ Chen, et al. Joining of silicon carbide ceramic for optical application by reaction bonded technology. In Proceedings of the 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. International Society for Optics and Photonics, 2010, 7654: 765410.
[116]
WB Tian, H Kita, H Hyuga, et al. Joining of SiC with Si infiltrated tape-cast TiB2-C interlayer: Effect of interlayer composition and thickness on the microstructure and mechanical properties. Mat Sci Eng A 2011, 530: 580-584.
[117]
QD Wu, F Sun, XL Ji, et al. Joining of pure carbide reaction-bonded silicon carbide ceramics. Rare Metal Mater Eng 2005, 34: 515-518.
[118]
QD Wu, F Sun, TY Tian, et al. Effect of welding solder properties on joining of reaction-bonded silicon carbide. J Chin Ceram Soc 2006, 34: 796-800.
[119]
CA Lewinsohn, M Singh, T Shibayama, et al. Joining of silicon carbide composites for fusion energy applications. J Nucl Mater 2000, 283-287: 1258-1261.
[120]
HL Liu, SJ Li. Joining of SiC and SiC-based composites using preceramic ploymers. J Chin Ceram Soc 2004, 32: 1246-1251.
[121]
P Colombo, B Riccardi, A Donato, et al. Joining of SiC/SiCf ceramic matrix composites for fusion reactor blanket applications. J Nucl Mater 2000, 278: 127-135.
[122]
HL Liu, SJ Li, ZJ Chen. Joining of reaction-bonded silicon carbide using a polysiloxane. Rare Metal Mater Eng 2006, 35: 134-137.
[123]
XK Yuan, S Chen, XH Zhang, et al. Joining SiC ceramics with silicon resin YR3184. Ceram Int 2009, 35: 3241-3245.
[124]
B Tang, MC Wang, RM Liu, et al. A heat-resistant preceramic polymer with broad working temperature range for silicon carbide joining. J Eur Ceram Soc 2018, 38: 67-74.
[125]
BF Zhou, KQ Feng, HL Zhou, et al. Joining of SiC ceramic by using the liquid polyvinylphenylsiloxane. Adv Appl Ceram 2018, 117: 212-216.
[126]
HL Liu, SJ Li, T Zhang, et al. Joining of reaction-bonded silicon carbide using SiC/Si3N4 preceramic polymer. Rare Metal Mater Eng 2005, 34: 1469-1472.
[127]
HL Liu, SJ Li, XG Li. Effect of nickel nanopowders addition on joining property of silicon carbide to itself by polysilazane. Rare Metal Mater Eng 2005, 34: 1905-1908.
[128]
XZ Wang, J Wang, H Wang. Synthesis of a novel preceramic polymer (V-PMS) and its performance in heat-resistant organic adhesives for joining SiC ceramic. J Eur Ceram Soc 2012, 32: 3415-3422.
[129]
XZ Wang, J Wang, H Wang. Preparation of high-temperature organic adhesives and their performance for joining SiC ceramic. Ceram Int 2013, 39: 1365-1370.
[130]
XZ Wang, J Wang, H Wang. Joining of SiC ceramics via a novel liquid preceramic polymer (V-PMS). Ceram Int 2015, 41: 7283-7288.
[131]
J Zheng, SP Beckman, JN Gray, et al. X-ray tomography study on green state joining of silicon carbide using polymer precursors. J Am Ceram Soc 2001, 84: 1961-1967.
[132]
J Zheng, M Akinc. Green state joining of SiC without applied pressure. J Am Ceram Soc 2001, 84: 2479-2483.
[133]
HE Khalifa, T Koyanagi, GM Jacobsen, et al. Radiation stable, hybrid, chemical vapor infiltration/preceramic polymer joining of silicon carbide components. J Nucl Mater 2017, 487: 91-95.
Journal of Advanced Ceramics
Pages 19-38
Cite this article:
LIU G, ZHANG X, YANG J, et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior. Journal of Advanced Ceramics, 2019, 8(1): 19-38. https://doi.org/10.1007/s40145-018-0297-x

1307

Views

189

Downloads

131

Crossref

N/A

Web of Science

139

Scopus

0

CSCD

Altmetrics

Received: 29 June 2018
Revised: 08 September 2018
Accepted: 26 September 2018
Published: 13 March 2019
© The author(s) 2019

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Return