Journal Home > Volume 7 , Issue 1

All the compositions in the (1−x)Mg0.95Ni0.05Ti0.98Zr0.02O3xCa0.6La0.8/3TiO3 (0 ≤ x ≤ 0.2) series were fabricated using solid state sintering route. Mg0.95Ni0.05Ti0.98Zr0.02O3 possessed excellent microwave dielectric properties with εr ≈ 17.1, Quf0 ≈ 195855 GHz, and τf ≈ -46 ppm/℃. τf was tuned through zero by mixing with Ca0.6La0.8/3TiO3. In the present study, τf ≈ -2 ppm/℃ with εr ≈ 23.9 and high Quf0 ≈ 115870 GHz was achieved for x = 0.15, i.e., for a mixture of 85% Mg0.95Ni0.05Ti0.98Zr0.02O3 and 15% Ca0.6La0.8/3TiO3.


menu
Abstract
Full text
Outline
About this article

Phase microstructure evaluation and microwave dielectric properties of (1-x)Mg0.95Ni0.05Ti0.98Zr0.02O3xCa0.6La0.8/3TiO3 ceramics

Show Author's information Abdul MANANa( )Zahid ULLAHaArbab Safeer AHMADbAtta ULLAHcDil Faraz KHANaArshad HUSSAINdMati Ullah KHANe
Laboratory for Research in Advanced Materials, Department of Physics, University of Science and Technology Bannu, 28100, Khyber Pakhtunkhwa, Pakistan
Department of Physics, Islamia College Peshawar, 25120, Khyber Pakhtunkhwa, Pakistan
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, China
Department of Chemistry, University of Science and Technology Bannu, 28100, Khyber Pakhtunkhwa, Pakistan
Department of Physics, Kohat University of Science and Technology Kohat, 26000, Khyber Pakhtunkhwa, Pakistan

Abstract

All the compositions in the (1−x)Mg0.95Ni0.05Ti0.98Zr0.02O3xCa0.6La0.8/3TiO3 (0 ≤ x ≤ 0.2) series were fabricated using solid state sintering route. Mg0.95Ni0.05Ti0.98Zr0.02O3 possessed excellent microwave dielectric properties with εr ≈ 17.1, Quf0 ≈ 195855 GHz, and τf ≈ -46 ppm/℃. τf was tuned through zero by mixing with Ca0.6La0.8/3TiO3. In the present study, τf ≈ -2 ppm/℃ with εr ≈ 23.9 and high Quf0 ≈ 115870 GHz was achieved for x = 0.15, i.e., for a mixture of 85% Mg0.95Ni0.05Ti0.98Zr0.02O3 and 15% Ca0.6La0.8/3TiO3.

Keywords: microstructure, density, phase, ilmenite structure

References(33)

[1]
MT Sebastian. Dielectric Materials for Wireless Communication. Elsevier, 2010.
[2]
X Huang, X Liu, F Liu, et al. Microstructures and microwave dielectric properties of (Ba1−xSrx)4(Sm0.4Nd0.6)28/3Ti18O54 solid solutions. J Adv Ceram 2017, 6: 50-58.
[3]
C-L Huang, S-S Liu. Dielectric characteristics of the (1−x)Mg2TiO4xSrTiO3 ceramic system at microwave frequencies. J Alloys Compd 2009, 471: L9-L12.
[4]
H Tamura, T Konoike, Y Sakabe, et al. Improved high-Q dielectric resonator with complex perovskite structure. J Am Ceram Soc 1984, 67: c59-c61.
[5]
S Nomura, K Kaneta. Ba(Mn1/3Ta2/3)O3 ceramic with ultra-low loss at microwave frequency. Jpn J Appl Phys 1984, 23: 507-508.
[6]
M Onada, J Kuwata, K Kaneta, et al. Ba(Zn1/3Nb2/3)O3–Sr(Zn1/3Nb2/3)O3 solid solution ceramics with temperature-stable high dielectric constant and low microwave loss. Jpn J Appl Phys 1982, 21: 1707-1710.
[7]
B-K Kim, H Hamaguchi, I-T Kim, et al. Probing of 1:2 ordering in Ba(Mg1/3Nb2/3)O3 and Ba(Zn1/3Nb2/3)O3 ceramics by XRD and Raman spectroscopy. J Am Ceram Soc 1995, 78: 3117-3120.
[8]
IM Reaney, I Qazi, WE Lee. Order–disorder behavior in Ba(Zn1/3Ta2/3)O3. J Appl Phys 2000, 88: 6708-6714.
[9]
L Chai, MA Akbas, PK Davies, et al. Cation ordering transformation in Ba(Mg1/3Ta2/3)O3–BaZrO3 perovskite solid solutions. Mater Res Bull 1997, 32: 1261-1269.
[10]
ES Kim, CJ Jeon. Microwave dielectric properties of ATiO3 (A = Ni, Mg, Co, Mn) ceramics. J Eur Ceram Soc 2010, 30: 341-346.
[11]
K Wakino. Recent development of dielectric resonator materials and filters in Japan. Ferroelectrics 1989, 91: 69-86.
[12]
VM Ferreira,, F Azough, R Freer, et al. The effect of Cr and La on MgTiO3 and MgTiO3–CaTiO3 microwave dielectric ceramics. J Mater Res 1997, 12: 3293-3299.
[13]
C-F Tseng, C-H Hsu. A new compound with ultra low dielectric loss at microwave frequencies. J Am Ceram Soc 2009, 92: 1149-1152.
[14]
H Yu, J Cheng, W Zhang, et al. Microwave dielectric properties of Mg(Zr0.05Ti0.95)O3–SrTiO3 ceramics. J Mater Sci: Mater El 2012, 23: 572-575.
[15]
C-L Huang, M-H Weng. Improved high Q value of MgTiO3–CaTiO3 microwave dielectric ceramics at low sintering temperature. Mater Res Bull 2001, 36: 2741-2750.
[16]
WW Cho, K Kakimoto, H Ohsato. Microwave dielectric properties and low-temperature sintering of MgTiO3–SrTiO3 ceramics with B2O3 or CuO. Mat Sci Eng B 2005, 121: 48-53.
[17]
C-L Huang, S-S Liu. Characterization of extremely low loss dielectrics (Mg0.95Zn0.05)TiO3 at microwave frequency. Jpn J Appl Phys 2007, 46: 283-285.
[18]
J-H Sohn, Y Inaguma, S-O Yoon, et al. Microwave dielectric characteristics of ilmenite-type titanates with high Q values. Jpn J Appl Phys 1994, 33: 5466-5470.
[19]
TS Kumar, P Gogoi, A Perumal, et al. Effect of cobalt doping on the structural, microstructure and microwave dielectric properties of MgTiO3 ceramics prepared by semi alkoxide precursor method. J Am Ceram Soc 2014, 97: 1054-1059.
[20]
C-H Shen, C-L Huang, C-F Shih, et al. Dielectric properties of Mg0.95Ni0.05TiO3 ceramic modified by Nd0.5Na0.5TiO3 at microwave frequencies. Curr Appl Phys 2009, 9: 1042-1045.
[21]
A Manan, DN Khan, A Ullah, et al. Phase, microstructure and microwave dielectric properties of Mg0.95Ni0.05Ti0.98Zr0.02O3 ceramics. Materials Science-Poland 2015, 33: 95-99.
[22]
A Manan, DN Khan, A Ullah. Synthesis and microwave dielectric properties of (1-x)Mg0.95Ni0.05Ti0.98Zr0.02O3xSrTiO3 ceramics. J Mater Sci: Mater El 2015, 26: 2066-2069.
[23]
A Pashkin, S Kamba, M Berta, et al. High frequency dielectric properties of CaTiO3-based microwave ceramics. J Phys D: Appl Phys 2005, 38: 741-748.
[24]
L Li, J Ye, S Zhang, et al. Influence of CaTiO3 modification on microstructures and microwave dielectric properties of Mg0.97Zn0.03TiO3 ceramics doped with 0.5mol% Zn-excess. J Alloys Compd 2015, 648: 184-189.
[25]
J Zhang, Z Yue, Y Zhou, et al. Microwave dielectric properties and thermally stimulated depolarization currents of (1-x)MgTiO3xCa0.8Sr0.2TiO3 ceramics. J Am Ceram Soc 2015, 98: 1548-1554.
[26]
J Li, T Qiu. Microwave sintering of Ca0.6La0.2667TiO3 microwave dielectric ceramics. Int J Miner Metall Mater 2012, 19: 2045-2051.
[27]
C-L Huang, S-S Liu. High-Q microwave dielectric in the (1-x)MgTiO3xCa0.6La0.8/3TiO3 ceramic system with a near-zero temperature coefficient of the resonant frequency. Mater Lett 2008, 62: 3205-3208.
[28]
J-J Wang, C-L Huang, P-H Li. Microwave dielectric properties of (1-x)(Mg0.95Zn0.05)TiO3xCa0.6La0.8/3TiO3 ceramic system. Jpn J Appl Phys 2006, 45: 6352.
[29]
J Li, T Qiu, C Fan, et al. Synthesis and microwave dielectric properties of Ca0.6La0.2667TiO3 nanocrystalline powders by sol–gel method. J Sol-Gel Sci Technol 2011, 59: 525-531.
[30]
RD Shannon. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Cryst 1976, A32: 751-767.
[31]
BA Wechsler, RB Von Dreele. Structure refinements of Mg2TiO4, MgTiO3 and MgTi205 by time-of-flight neutron powder diffraction. Acta Cryst 1989, B45: 542-549.
[32]
C-L Huang, C-H Shen. Phase evolution and dielectric properties of (Mg0.95M0.052+)Ti2O5 (M2+ = Co, Ni, and Zn) ceramics at microwave frequencies. J Am Ceram Soc 2009, 92: 384-388.
[33]
SS Rajput, S Keshri, VR Gupta. Microwave dielectric properties of (1−x)Mg0.95Zn0.05TiO3–(x)Ca0.6La0.8/3TiO3 ceramic composites. J Alloys Compd 2013, 552: 219-226.
Publication history
Copyright
Rights and permissions

Publication history

Received: 23 June 2017
Revised: 02 December 2017
Accepted: 25 December 2017
Published: 17 January 2018
Issue date: March 2018

Copyright

© The author(s) 2018

Rights and permissions

Open Access The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/ by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Return