AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Journal of Advanced Ceramics Article
PDF (17.6 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Friction and wear properties of nano-Si3N4/nano-SiC composite under nanolubricated conditions

M. S. CHAROO, M. F. WANI( )
Centre for Tribology, Mechanical Engineering Department, National Institute of Technology Srinagar （J&K）, 190006, India
Show Author Information

Abstract

Friction and wear properties of nano-Si3N4/nano-SiC composite were studied under nanolubricated conditions. Mineral oil mixed with nanoparticles of diamond was used as lubricant. A friction coefficient of 0.043 and a wear coefficient of 4.2×10-7 were obtained for nano-Si3N4/nano- SiC composite under normal load of 600 N with mineral oil + 0.5 wt% nanodiamond, whereas a friction coefficient of 0.077 and a wear coefficient of 10.3×10-7 were obtained for nano-Si3N4/nano- SiC composite under normal load of 600 N with mineral oil. 3D surface profilometer was used to study the surface morphology of wear scars. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies were conducted to illustrate reduction in friction and wear.

Keywords

frictionwearnano-ceramicsnanolubricationnano-Si3N4/nano-SiC

References

[1]
Segent JE. Chapter 7. Ceramic and ceramic composites. In Handbook of Materials for Product Design. Harper CA, Ed. New York: McGraw Hill, 2003: 7.1–7.6.
[2]
Wani MF. Mechanical and tribological properties of a nano-Si3N4/nano-BN composite. Int J Appl Ceram Tec 2010, 7: 512-517.
Google Scholar
[3]
Sun Y, Meng Q, Jia D, et al. Effect of hexagonal BN on the microstructure and mechanical properties of Si3N4 ceramics. J Mater Process Tech 2007, 182: 134-138.
Crossref Google Scholar
[4]
Qiao Y-L, Sun X-F, Xu B-S, et al. High temperature tribological behaviors of nano-diamond as oil additive. J Cent South Univ T 2005, 12: 181-185.
Crossref Google Scholar
[5]
Chou CC, Lee SH. Rheological behavior and tribological performance of nanodiamond-dispersed lubricant. J Mater Process Tech 2008, 201: 542-547.
Crossref Google Scholar
[6]
Šajgalík P, Hnatko M, Lenčéš Z, et al. In situ preparation of Si3N4 /SiC nanocomposites for cutting tools application. Int J Appl Ceram Tec 2006, 3: 41-46.
Crossref Google Scholar
[7]
Rapoport L, Feldman Y, Homyonfer M, et al. Inorganic fullerene-like material as additives to lubricants: Structure–function relationship. Wear 1999, 225-229: 975-982.
Crossref Google Scholar
[8]
Wu YY, Tsui WC, Liu TC. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 2007, 262: 819-825.
Crossref Google Scholar
[9]
Marko M, Kyle J, Branson B, et al. Tribological improvements of dispersed nanodiamond additives in lubricating mineral oil. J Tribol 2014, 137: 011802.
Crossref Google Scholar
[10]
Zhao W, Basnet B, Kim IJ. Carbon nanotube formation using zeolite template and applications. J Adv Ceram 2012, 1: 179-193.
Crossref Google Scholar
[11]
Tarasov S, Kolubaev A, Belyaev S, et al. Study of friction reduction by nanocopper additives to motor oil. Wear 2002, 252: 63-69.
Crossref Google Scholar
[12]
Rapoport L, Leshchinsky V, Lapsker I, et al. Tribological properties of WS2 nanoparticles under mixed lubrication. Wear 2003, 255: 785-793.
Crossref Google Scholar
[13]
Liu G, Li X, Lu N, et al. Enhancing AW/EP property of lubricant oil by adding nano Al/Sn particles. Tribol Lett 2005, 18: 85-90.
Crossref Google Scholar
[14]
Radice R, Mischler S. Effect of electrochemical and mechanical parameters on the lubrication behaviour of Al2O3 nanoparticles in aqueous suspensions. Wear 2006, 261: 1032-1041.
Crossref Google Scholar
[15]
Chou C-C, Lee S-H. Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminium alloy. Wear 2010, 269: 757-762.
Crossref Google Scholar
[16]
Joly-Pottuz L, Matsumoto N, Kinoshita H, et al. Diamond-derived onions as lubricant additives. Tribol Int 2008, 41: 69-78.
Crossref Google Scholar
[17]
Chang L, Zhang Z, Breidt C, et al. Tribological properties of epoxy nanocomposites: I. Enhancement of the wear resistance by nano-TiO2 particles. Wear 2005, 258: 141-148.
Crossref Google Scholar
[18]
Mochalin V, Shenderova O, Ho D, et al. The properties and applications of nanodiamonds. Nat Nanotechnol 2012, 7: 11-23.
Crossref Google Scholar
[19]
Lee J, Cho S, Hwang Y, et al. Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces. Tribol Int 2009, 42: 440-447.
Crossref Google Scholar
[20]
Chang Y, Wang H, Zhu Q, et al. Theoretical calculation and analysis of ZrO2 spherical nanometer powders. J Adv Ceram 2013, 2: 21-25.
Crossref Google Scholar
[21]
Gu C, Li Q, Gu Z, et al. Study on application of CeO2 and CaCO3 nanoparticles in lubricating oils. J Rare Earth 2008, 26: 163-167.
Crossref Google Scholar
[22]
Song H-J, Zhang Z-Z, Men X-H. The tribological behaviors of the polyurethane coating filled with nano-SiO2 under different lubrication conditions. Composites Part A 2008, 39: 188-194.
Crossref Google Scholar
[23]
Battez AH, González R, Viesca JL, et al. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants. Wear 2008, 265: 422-428.
Crossref Google Scholar
[24]
Yu H-L, Xu Y, Shi P-J, et al. Tribological properties of lubricating mechanisms of Cu nanoparticles in lubricant. T Nonferr Metal Soc 2008, 18: 636-641.
Crossref Google Scholar
[25]
Hnatko M, Šajgalík P, Lenčéš Z, et al. Low cost SiC/Si3N4 nanocomposites. Key Eng Mat 2002, 206-213: 1061-1064.
Crossref Google Scholar
[26]
Wu J-M, Zhang X-Y, Xu J, et al. Preparation of porous Si3N4 ceramics via tailoring solid loading of Si3N4 slurry and Si3N4 poly-hollow microsphere content. J Adv Ceram 2015, 4: 260-266.
Crossref Google Scholar
[27]
Stachowiak GW, Batchelor AW. Engineering Tribology, 3rd edn. Elsevier Butterworth-Heinemann, 2010: 7.26-7.27.
Google Scholar
Journal of Advanced Ceramics
Volume 5 Issue 2,
June 2016
Pages 145-152
DOI: 10.1007/s40145-016-0183-3
Cite this article:
CHAROO MS, WANI MF. Friction and wear properties of nano-Si3N4/nano-SiC composite under nanolubricated conditions. Journal of Advanced Ceramics, 2016, 5(2): 145-152. https://doi.org/10.1007/s40145-016-0183-3

775

Views

40

Downloads

14

Crossref

N/A

Web of Science

16

Scopus

0

CSCD

Altmetrics
Received: 02 October 2015
Revised: 16 February 2016
Accepted: 26 February 2016
Published: 24 May 2016
© The author(s) 2016

Open Access The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons. org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Return