AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Effect of transition metal oxides doping on Ce0.9Sm0.05Nd0.05O1.95 solid electrolyte materials

Ming ZHOULin GEHan CHENLucun GUO*( )
College of Materials Science and Engineering, Nanjing University of Technology, No.5 Xinmofan Road, Nanjing, 210009, China
Show Author Information

Abstract

The effect of transition metal oxides (TMOs) CoO1.5, FeO1.5 and MnO2 addition on Ce0.9Sm0.05Nd0.05O1.95 was studied. The crystal structures, microstructures, thermal expansion and electrical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), dilatometer and AC impedance spectroscopy,respectively. The results show that the TMOs addition remarkably promotes the densification of Ce0.9Sm0.05Nd0.05O1.95 and reduces the sintering temperature by ~150 ℃. The samples with TMOs addition sintered at 1450 ℃ exhibit higher conductivities than those sintered at 1500 ℃. The maximum conductivity of 0.040 s.cm-1 at 700 ℃ was achieved with 1 mol% FeO1.5 doping when sintered at 1450 ℃. In addition, the thermal expansion was linear for all the samples. The doping of TMOs does not appreciably change thermal expansion coefficient.

References

[1]
Li SJ, Ge L, Gu HH, et al. Sinterability and electrical properties of ZnO-doped Ce0.8Y0.2O1.9 electrolytes prepared by an EDTA-citrate complexing method. J Alloys Compd 2011, 509: 9498.
[2]
Wang ZW, Hashimoto SI, Mori M. Investigation and optimization of interface reactivity between Ce0.9Gd0.1O1.95 and Zr0.89Sc0.1Ce0.01O2-δ for high performance intermediate temperature-solid oxide fuel cells. J Power Sources 2009, 93: 4954.
[3]
Omar S, Wachsman ED, Jones JL, et al. Crystal structure-Ionic conductivity relationships in doped ceria systems. J Am Ceram Soc 2009, 11: 26742681.
[4]
Gao L, Zhou M, Zheng YF, et al. Effect of zinc oxide on yttria doped ceria. J Power Sources 2010, 195: 31303134.
[5]
Li B, Wei X, Pan W. Electrical properties of Mg-doped Gd0.1Ce0.9O1.95 under different sintering temperature. J Power Sources 2008, 183: 498505.
[6]
Fu YP, Chen SH, Huang JJ. Preparation and characterization of Ce0.8M0.2O2-δ (M=Y, Gd, Sm, Nd, La) solid electrolyte materials for solid oxide fuel cells. Int J Hydrog Energy 2010, 35: 745752.
[7]
Ahn JS, Omar S, Yoon HS, et al. Performance of anode-supported solid oxide fuel cell using novel ceria electrolyte. J Power Sources 2010, 195: 21313135.
[8]
Dikmen S, Aslanbay H, Dikmen E, et al. Preparation and electrochemical properties of Gd3+ and Bi3+, Sm3+, La3+, and Nd3+codped ceria-based electrolytes for intermediate temperature-solid oxide fuel cell. J Power Sources 2010, 195: 24882495.
[9]
Li B, Liu YY, Wei X, et al. Electrical properties of ceria Co-doped with Sm3+ and Nd3+. J Power Sources 2010, 195: 969976.
[10]
Li B, Wei X, Pan W. Improved electrical conductivity of Ce0.9Gd0.1O1.95 and Ce0.9Sm0.1O1.95 by co-doping. Int J Hydrog Energy 2010, 35: 30183022.
[11]
Ayawanna J, Wattanasiriwech D, Wattanasiriwech S, et al. Effects of cobalt metal addition on sintering and ionic conductivity of Sm(Y)-doped ceria solid electrolyte for SOFC. Solid State Ion 2009, 180: 13881394.
[12]
Dutta A, Kumar A, Basu RN. Enhanced electrical conductivity in Ce0.79Gd0.20Co0.01O2-δ for low temperature solid oxide fuel cell applications. Electrochem Commun 2009, 11: 699701.
[13]
Foschini CR, Souza DPF, Filho PIP, et al. AC impedance study of Ni, Fe, Cu, Mn doped ceria stabilized zirconia ceramics. J Eur Ceram Soc 2001, 21: 11431150.
[14]
Zhang TS, Hing P, Huang HT, et al. The effect of Fe doping on the sintering behavior of commercial CeO2 powder. J Mater Process Technol 2001, 113: 463468.
[15]
Lewis GS, Atkinson A, Steele BCH, et al. Effect of Co addition on the lattice parameter, electrical conductivity and sintering of gadolinia-doped ceria. Solid State Ion 2002, 152-153: 567573.
[16]
Kondakindi RR, Karan K. Characterization of Fe- and Mn-doped GDC for low-temperature processing of solid oxide fuel cells. Mater Chem Phys 2009, 115: 728734.
[17]
Zhang TS, Ma J, Leng YJ, et al. Effect of transition metal oxides on densification and electrical properties of Si-containing Ce0.8Gd0.2O2-δ ceramics. Solid State Ion 2004, 168: 187195.
[18]
Zhang TS, Ma J, Leng YJ, et al. Iron oxide as an effective sintering aid and a grain boundary scavenger for ceria-based electrolytes. Solid State Ion 2004, 167: 203207.
[19]
Guo X, Waser R. Electrical properties of the grain boundaries of oxygen ion conductors: Acceptor-doped zirconia and ceria. Prog Mater Sci 2006, 51: 151210.
Journal of Advanced Ceramics
Pages 150-156
Cite this article:
ZHOU M, GE L, CHEN H, et al. Effect of transition metal oxides doping on Ce0.9Sm0.05Nd0.05O1.95 solid electrolyte materials. Journal of Advanced Ceramics, 2012, 1(2): 150-156. https://doi.org/10.1007/s40145-012-0013-1

884

Views

20

Downloads

8

Crossref

N/A

Web of Science

7

Scopus

0

CSCD

Altmetrics

Received: 26 August 2011
Accepted: 14 December 2011
Published: 08 September 2012
© The author(s) 2012
Return