Journal Home > Volume 1 , Issue 2
Journal of Advanced Ceramics 2012, 1(2): 130-137 https://doi.org/10.1007/s40145-012-0012-2
Review | Open Access | Issue | Published: 08 September 2012

Application of mechanochemical synthesis of advanced materials

Show Author's Information Hao WU,  Qiang LI*( )
Department of Chemistry, East China Normal University, Shanghai 200062, China
Keywords:
composite materials, mechanochemical, advanced materials, nano scale
Cite this article:
WU H, LI Q. Application of mechanochemical synthesis of advanced materials. Journal of Advanced Ceramics, 2012, 1(2): 130-137. https://doi.org/10.1007/s40145-012-0012-2
Download citation
EndNote(RIS)
BibTeX

682

Views

20

Downloads

Citations

17

Crossref

N/A

WoS

20

Scopus

0

CSCD

Abstract Full text About this article

An overview is given of recent development of mechanochemical processes for the preparation of advanced ceramics. Some fundamental mechanical effects are firstly compared and discussed. Several important application fields are listed as follow, stemming from oxide materials, non-oxide materials, and composite materials to nano-structured materials.


menu
Abstract
Full text
Outline
About this article

Application of mechanochemical synthesis of advanced materials

Show Author's information Hao WU, Qiang LI*( )
Department of Chemistry, East China Normal University, Shanghai 200062, China

Abstract

An overview is given of recent development of mechanochemical processes for the preparation of advanced ceramics. Some fundamental mechanical effects are firstly compared and discussed. Several important application fields are listed as follow, stemming from oxide materials, non-oxide materials, and composite materials to nano-structured materials.

Keywords: composite materials, mechanochemical, advanced materials, nano scale

References(32)

[1]
Gajovic A, Santic A, Djerdj I, et al. Structure and electrical conductivity of porous zirconium titanate ceramics produced by mechanochemical treatment and sintering. J Alloys Compd 2009, 479: 525–531.
DOI Google Scholar
[2]
Ni X, Ma J, Li JG, et al. Microwave characteristics of Co/TiO2 nanocomposites prepared by mechanochemical synthesis. J Alloys Compd 2009, 46: 386–391.
DOI Google Scholar
[3]
Xu X, Tang JY, Nishimura T, et al. Synthesis of Ca-a-SiAlON phosphors by a mechanochemical activation route. Acta Mater 2011, 59: 1570–1576.
DOI Google Scholar
[4]
Tojo T, Zhang QW, Saito F. Mechanochemical synthesis of FeSbO4-based materials from FeOOH and Sb2O5 powders. Powder Technol 2008, 181: 281–284.
DOI Google Scholar
[5]
Hea Q, Wang HZ, Wen GH, et al. Formation and properties of BaxFe3−xO4 with spinel structure by mechanochemical reaction of Fe2O3 and BaCO3. J Alloys Compd 2009, 486: 246–249.
DOI Google Scholar
[6]
Rojac T, Trtnik Ž, Kosec M. Mechanochemical reactions in Na2CO3-M2O5 (M=V, Nb, Ta) powder mixtures: Influence of transition-metal oxide on reaction rate. Solid State Ion 2011, 190: 1–7.
DOI Google Scholar
[7]
Zoltán Juhász A. Aspects of mechanochemical activation in terms of comminution theory. Colloids Surf A- Physicochem Eng Asp 1998, 141: 449–462.
DOI Google Scholar
[8]
Venkatalaman KS, Narayanan KS. Energetics of collision between grinding media in ball mills and mechanochemical effects. Powder Technol 1998, 96: 190–201.
DOI Google Scholar
[9]
Iwasaki T, Satoh M, Koga T. Analysis of collision energy of bead media in a high-speed elliptical-rotor-type powder mixer using the discrete element method. Powder Technol 2001, 121(2-3): 239–248.
DOI Google Scholar
[10]
Ohara S, Abe H, Sato K. Effect of water content in powder mixture on mechanochemical reaction of LaMnO3 fine powder. J Eur Ceram Soc 2008, 28: 1815–1819.
DOI Google Scholar
[11]
Stojanovic DB. Mechanochemical synthesis of ceramic powders with perovskite structure. J Mater Process Technol 2003, 143-144: 78–81.
DOI Google Scholar
[12]
Zhang QW, Tojo T, Tongamp W. Correlation between mechanochemical reactivity forming ABO4-type complex oxides and the structures of product materials. Powder Technol 2009, 195: 40–43.
DOI Google Scholar
[13]
Wu H, Chen C, Jiang DY, et al. Fast mechanochemical synthesis of nano- structured PMN at low temperature. J Inorg Mater 2010, 25(5): 541–545.
DOI Google Scholar
[14]
Song J, Xu B, Huang DX, et al. Synthesis, structure and properties of super fine LiMn2O4. Adv Mater Res 2011, 177: 9–11.
DOI Google Scholar
[15]
Kameshima Y, Irie M, Yasumori A, et al. Mechanochemical effect on low temperature synthesis of AlN by direct nitridation method. Solid State Ion 2004, 172: 185–190.
DOI Google Scholar
[16]
Akgün B, Erdem Çamurlu H, Topkaya Y, et al. Mechanochemical and volume combustion synthesis of ZrB2. Int J Refract Met Hard Mater 2011, 29(5): 601–607.
DOI Google Scholar
[17]
Roldan MA, López-Flores V, Alcala MD, et al. Mechanochemical synthesis of vanadium nitride. J Eur Ceram Soc 2010, 30: 2099–2107.
DOI Google Scholar
[18]
Sakaki M, Bafghi MS, Vahdati Khaki J, et al. Effect of the aluminum content on the behavior of mechanochemical reactions in theWO3-C-Al system. J Alloys Compd 2009, 480: 824–829.
DOI Google Scholar
[19]
Mohammad Sharifi E, Karimzadeh F, Enayati MH. A study on mechanochemical behavior of B2O3-Al system to produce alumina-based nanocomposite. J Alloys Compd 2009, 482(1-2): 110–113.
DOI Google Scholar
[20]
Sabooni S, Mousavi T, Karimzadeh F. Mechanochemical assisted synthesis of Cu(Mo)/ Al2O3 nanocomposite. J Alloys Compd 2010, 497: 95–99.
DOI Google Scholar
[21]
Mohammad Sharifi E, Karimzadeh F, Enayati MH. Synthesis of titanium diboride reinforced alumina matrix nanocomposite by mechanochemical reaction of Al-TiO2-B2O3. J Alloys Compd 2010, 502: 508–512.
DOI Google Scholar
[22]
Mohammad Sharifi E, Karimzadeh F, Enayati MH. Preparation of Al2O3-TiB2 nanocomposite powder by mechanochemical reaction between Al, B2O3 and Ti. Adv Powder Technol 2011, 22: 526–531.
DOI Google Scholar
[23]
Sabooni S, Karimzadeh F, Abbasi MH. A study on the mechanochemical behavior of TiO2-Al-Si system to produce Ti5Si3-Al2O3 nanocomposite. Adv Powder Technol 2012, 23(2): 199–204.
DOI Google Scholar
[24]
Kosova NV, Devyatkina ET, Kaichev VV, et al. From 'core-shell' to composite mixed cathode materials for rechargeable lithium batteries by mechanochemical process. Solid State Ion 2011, 192(1): 284–288.
DOI Google Scholar
[25]
Mahajan S, Prakash C, Thakur OP. Piezoelectric properties of 0.5(PbNi1/3Nb2/3)O3-0.5Pb(Zr0.32Ti0.68)O3 ceramics prepared by solid state reaction and mechanochemical activation-assisted method. J Alloys Compd 2009, 471: 507–510.
DOI Google Scholar
[26]
Ebrahimi-Kahrizsangi R, Nasiri-Tabrizi B, Chami A. Synthesis and characterization of fluorapatiteetitania (FApeTiO2) nanocomposite via mechanochemical process. Solid State Sci 2010, 12: 1645–1651.
DOI Google Scholar
[27]
Dodd CA. A comparison of mechanochemical methods for the synthesis of nanoparticulate nickel oxide. Powder Technol 2009, 196: 30–35.
DOI Google Scholar
[28]
Baláz P, Dutková E, Skorvánek I, et al. Kinetics of mechanochemical synthesis of Me/FeS (Me=Cu, Pb, Sb) nanoparticles. J Alloys Compd 2009, 483: 484–487.
DOI Google Scholar
[29]
Plashnitsa VV, Gupta V, Miura N. Mechanochemical approach for fabrication of a nano-structured NiO-sensing electrode used in a zirconia-based NO2 sensor. Electrochim Acta 2010, 55: 6941–6945.
DOI Google Scholar
[30]
Mancheva M, Iordanova R, Dimitriev Y. Mechanochemical synthesis of nanocrystalline ZnWO4 at room temperature. J Alloys Compd 2011, 509: 15–20.
DOI Google Scholar
[31]
Nasiri-Tabrizi B, Honarmandi P, Ebrahimi-Kahrizsangi R, et al. Synthesis of nanosize single-crystal hydroxyapatite via mechanochemical method. Mater Lett 2009, 63: 543–546.
DOI Google Scholar
[32]
Zhang N, Chu J, Li CX, et al. A facile route to synthesize the Ti5NbO14 nanosheets by mechanical cleavage process. J Am Ceram Soc 2010, 93(2): 536–540.
DOI Google Scholar
Publication history
Copyright
Acknowledgements
Rights and permissions

Publication history

Received: 18 September 2011
Accepted: 04 March 2012
Published: 08 September 2012
Issue date: June 2012

Copyright

© The author(s) 2012

Acknowledgements

The project is supported by National Natural Science Foundation of China (No. 20671035) and the Open Fund of Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences.

Rights and permissions

Return