References(78)
[1]
Michels BD, Frischa GH. Microhardness of chalcogenide glasses of the system Se-Ge-As. J Mater Sci 1982, 17: 329-334.
[2]
Hirao K, Tomozawa M. Microhardness of SiO2 glass in various environments. J Am Ceram Soc 1987, 70: 497-502.
[3]
Clinton DJ, Morrell R. Hardness testing of ceramic materials. Mater Chem Phys 1987, 17: 461-473.
[4]
Li H, Bradt RC. The microhardness indentation load/size effect in rutile and cassiterite single crystals. J Mater Sci 1993, 28: 917-926.
[5]
Quinn JB, Quinn GD. Indentation brittleness of ceramics: A fresh approach. J Mater Sci 1997, 32: 4331-4346.
[6]
Gong JH, Wu JJ, Z.D. Guan. Examination of the indentation size effect in low-load Vickers hardness testing of ceramics. J Europ Ceram Soc 1999, 19: 2625-2631.
[7]
Ullner C, Germak A, Le Doussal H, et al. Hardness testing on advanced technical ceramics. J Europ Ceram Soc 2001, 21: 439-451.
[8]
Sebastina S, Khadar M. Microhardness indentation size effect studies in 60B2O3=(40-x)PbO-xMcl2 (M = Pb, Cd) glasses. J Mater Sci 2005, 40: 1655-1659.
[9]
Mukhopadhyay NK, Paufler P. Micro- and nanoindentation techniques for mechanical characterization of materials. Inter Mater Rev 2006, 41: 209-245.
[10]
Sangwal K. Review: Indentation size effect, indentation cracks and microhardness measurement of brittle crystalline solids – some basic concepts and trends. Cryst Res Technol 2009, 44: 1019-1037.
[11]
Young CT, Rhee SK. Evaluation of correction methods for determining load-independent Knoop microhardness. J Test Eval 1978, 6: 221-230.
[12]
Mott BW. Micro-Indentation Hardness Testing. London, UK: Butterworths Scientific, 1956.
[13]
Bükle IH. Progress in micro-indentation hardness testing. Metall Rev 1959, 4: 49-100.
[14]
Blau PJ, Lawn BR, Eds. Microindentation Techniques in Materials Science and Engineering. Philadelphia: American Society for Testing and Materials, 1986.
[15]
Brown ARG, Ineson E. Experimental survey of low-load hardness testing instruments. J Iron Steel Institute 1957, 169: 376-388.
[16]
Mason W, Johnson PF, Varner JR. Importance of load cell sensitivity in determination of the load dependence of hardness in recording microhardness. J Mater Sci 1991, 26: 6576-6580.
[17]
Bückle IH. Use of the hardness test to determine other material properties. In: The Science of Hardness Testing and Its Research Application. Westbook JH, Conrad H, Eds. American Society for Metals, 1973: 453-494.
[18]
Tarkanian ML, Neumann JP, Raymond L. Determination of the temperature dependence of {100} and {112} slip in tungsten from Knoop hardness measurements. In: The Science of Hardness Testing and Its Research Application. Westbook JH, Conrad H, Eds. American Society for Metals, 1973: 187-198.
[19]
O'Neill H. The Hardness of Metals and Its Measurement. Cleveland: Sherwood, 1934.
[20]
Ma Q, Clarke DR. Size-dependent hardness of silver single-crystals. J Mater Res 1995, 10: 853-863.
[21]
Nix WD, Gao HJ. Indentation size effects in crystalline materials: A law of strain gradient plasticity. J Mech. Phys Solids 1998, 46: 411-425.
[22]
Gerberich WW, Tymiak NI, Grunlan JC, et al. Interpretations of indentation size effects. J Appl Mech Trans ASME 2002, 69: S433-442.
[23]
Sangwal K, Surowska B, Blaziak P. Analysis of the indentation size effect in the microhardness measurement of some cobalt-based alloys. Mater Chem Phys 2003, 77: 511-520.
[24]
Sahin O, Uzun O, Kolemen U, et al. Indentation size effect and microhardness study of beta-Sn single crystals. Chin Phys Lett 2005, 22: 3137-3140.
[25]
Kolemen U. Analysis of ISE in microhardness measurements of bulk MgB2 superconductors using different models. J Alloys Comp 2006, 425: 429-435.
[26]
Anandakumar VM, Khadar MA. Microhardness studies of nanocrystalline lead molybdate. Mater Sci Eng A 2009, 519: 141-146.
[27]
Terzioglu C. Investigation of some physical properties of Gd added Bi-2223 superconductors. J Alloys Comp 2011, 509: 87-93.
[28]
Meyer E. Investigations on hardness testing and hardness. VDI Zeitschriff 1908, 52: 2077-2078.
[29]
Hays C, Kendall EG. An analysis of Knoop microhardness. Metall 1973, 6: 275-282.
[30]
Fröhlich F, Grau P, Grellmann W. Performance and analysis of recording microhardness tests. Phys Status Solidi 1977, 42: 79-89.
[31]
Gong JH, Si WJ, Guan ZD. Effect of load-dependence of hardness on indentation toughness determination for soda-lime glass. J Non-Cryst Solids 2001, 282: 325-328.
[32]
Gong JH, Wu JJ, Guan ZD. Load dependence of the apparent hardness of silicon nitride ceramics in a wider range of loads. Mater Lett 1998, 35: 58-61.
[33]
Gong JH, Guan ZD. Load dependence of low-load Knoop hardness in ceramics: a modified PSR model. Mater Lett 2001, 47: 140-144.
[34]
Gong JH. Comment on “measurement of hardness on traditional ceramics”. J Europ Ceram Soc 2003, 23: 1769-1772.
[35]
Gong JH, Pan XT, Miao HZ, et al. Effect of metallic binder content on the microhardness of TiCN-based cermets. Mater Sci Eng A 2003, 359: 391-395.
[36]
Gong JH, Zhao Z, Guan ZD, et al. Load-dependence of Knoop hardness of Al2O3-TiC composites. J Europ Ceram Soc 2000, 20: 1895-1900.
[37]
Gong JH, Miao HZ, Hu BJ. Compositional dependence of hardness of (Ce,Y)-TZP/Al2O3 composites. Mater Sci Eng A 2004, 372: 207-212.
[38]
Peng ZJ, Gong JH, Miao HZ. On the description of indentation size effect in hardness testing for ceramics: analysis of the nanoindentation data. J Europ Ceram Soc 2004, 24: 2193-2201.
[39]
Dey A, Mukhopadhyay AK, Gangadharan S, et al. Nanoindentation study of microplasma sprayed hydroxyapatite coating. Ceram Int 2009, 35: 2295-2304.
[40]
Gong JH, Miao HZ, Zhao Z, et al. Load-dependence of the measured hardness of Ti(C,N)-based cermets. Mater Sci Eng A 2001, 303: 179-186.
[41]
Charkraborty D, Mukerji J. Characterization of silicon nitride single crystals and polycrystalline reaction sintered silicon nitride by microhardness measurements. J Mater Sci 1980, 15: 3051-3056.
[42]
Babini GN, Bellosi A, Galassi C. Characterization of hot-pressed silicon nitride-based materials by microhardness measurements. J Mater Sci 1987, 22: 1687-1693.
[43]
Sargent PM, Page TF. The influence on the microhardness of ceramic materials. Proc Brit Ceram Soc 1978, 26: 209-224.
[44]
Li H, Bradt RC. Knoop microhardness anisotropy of single crystal cassiterite (SnO2). J Am Ceram Soc 1991, 74: 1053-1060.
[45]
Gong JH, Guan ZD. Energy-balance relationship in Knoop hardness test for ceramics. J Chin Ceram Soc 1995, 23: 308-313.
[46]
Lawn BR, Evans AG, Marshall DB. Elastic/plastic indentation damage in ceramics: The median/radial crack system. J Am Ceram Soc 1980, 63: 574-581.
[47]
Gong JH, Yuan QM. Indentation size effect for Knoop hardness testing. J Tianjin Univ 1996, 29: 727-731.
[48]
Gong JH, Li LX. Indentation hardness of mullite based ceramics. J Inorg Mater 1996, 11: 375-380.
[49]
Mukhopadhyay NK. Analysis of microhardness data using the normalized power law equation and energy balance model. J Mater Sci 2005, 40: 241-244.
[50]
Liu Q, Yao YX, Zhou L. Theoretical analysis of indentation size effect. J Test Meas Technol 2009, 23: 1-6.
[51]
Gong JH. On the energy balance model for conventional Vickers microhardness testing of brittle ceramics. J Mater Sci Lett 2000, 19: 515-517.
[52]
Gong JH, Guan ZD. Effect of microcracking on the energy-balance relationship for hardness testing of ceramics. Mater Lett 2001, 49: 180-184.
[53]
Li Z, Ghosh A, Kobayashi AS, et al. Indentation fracture toughness of sintered silicon carbide in the Palmqvist crack regime. J Am Ceram Soc 1989, 72: 904-911.
[54]
Quinn GD, Green P, Xu L. Cracking and the indentation size effect for Knoop hardness of glasses. J Am Ceram Soc 2003, 86: 441-448.
[55]
Atkinson M, Shi H. Friction effect in low load hardness testing of iron. Mater Sci Technol 1989, 5: 613-614.
[56]
Shi H, Atkinson M. A friction effect in low-load hardness testing of copper and aluminum. J Mater Sci 1990, 25: 2111-2114.
[57]
Li H, Ghost A, Han YH, et al. The friction component of the indentation size effect in low load microhardness testing. J Mater Res 1993, 8: 1028-1032.
[58]
Gong JH, Wu JJ, Guan ZD. Description of the indentation size effect in hot-pressed silicon-nitride-based ceramics. J Mater Sci Lett 1998, 17: 473-475.
[59]
Lawn BR, Wilshaw TR. Indentation fracture: Principles and applications. J Mater Sci 1975, 10: 1049-1081.
[60]
Marshall DB, Lawn BR. Residual stress effects in sharp contact cracking: Part 1 Indentation fracture mechanics. J Mater Sci 1979, 14: 2001-2012.
[61]
Johnsonwalls D, Evans AG, Marshall DB, et al. Residual stresses in machined ceramic surfaces. J Am Ceram Soc 1986, 69: 44-47.
[62]
Li K, Liao TW. Surface/subsurface damage and the fracture strength of ground ceramics. J Mater Process Technol 1996, 57: 207-220.
[63]
Wu H, Roberts SG, Berby B. Residual stress and subsurface damage in machined alumina and alumina/silicon carbide nanocomposite ceramics. Acta Mater 2001, 49: 507-517.
[64]
Xie ZH, Hoffman M, Cheng YB. Microstructural tailoring and characterization fo a calcium αSiAlON composition. J Am Ceram Soc 2002, 85: 812-818.
[65]
Kolemen U, Uzun O, Yilmazlar M, et al. Hardness and microstructural analysis of Bi1.6Pb0.4Sr2Ca2-xSmxCu3Oy polycrystalline superconductors. J Alloys Comp 2006, 415: 300-306.
[66]
Sidjanin L, Rajnovic D, Ranogajec J, et al. Measurement of Vickers hardness on ceramic floor tiles. J Europ Ceram Soc 2007, 27: 1767-1773.
[67]
Wang K, Russel C, Liu CS. Preparation, mechanical properties and corrosion behaviors of oriented Ca(PO3)2 glass-ceramics. Mater Chem Phys 2008, 111: 106-113.
[68]
Sahin O, Uzun O, Sopicka-Lizer M, et al. Dynamic hardness and elastic modulus calculation of porous SiAlON ceramics using depth-sensing indentation technique. J Europ Ceram Soc 2008, 28: 1235-1242.
[69]
Filetin T, Solic S, Zmak I. The indentation size effect on the micro-hardness of sea mollusk shell structures. Mater Test 2011, 53: 48-53.
[70]
Chicot D, Roudet F, Soom A, et al. Interpretation of instrumented hardness measurements on stainless steel with different surface preparations. Surf Eng 2007, 23: 32-39.
[71]
Sidjanin L, Ranogajec J, Rajnovic D, et al. Influence of firing temperature on mechanical properties on roofing tiles. Mater Design 2007, 28: 941-947.
[72]
Nursoy M, Yilmazlar M, Terzioglu C, et al. Transport, microstructure and mechanical properties of Au diffusion-doped Bi-2223 superconductors. J Alloys Comp 2008, 459: 399-406.
[73]
Rios CT, Coelho AA, Batista WW, et al. ISE and fracture toughness evaluation by Vickers hardness testing of an Al3Nb-Nb2Al-AlNbNi in situ composite. J Alloys Comp 2009, 472: 65-70.
[74]
Feltham P, Banerjee R. Theory and application of microindentation in studies of glide and cracking in single crystals of elemental and compound semiconductors. J Mater Sci 1992, 27: 1626-1632.
[75]
Li H, Bradt RC. The effect of indentation-induced cracking on the apparent microhardness. J Mater Sci 1996, 31: 1065-1070.
[76]
Sakai T, Ghosh A, Bradt RC. The indentation fracture resistance of self-reinforced mullites. In: Fracture Mechanics of Ceramics, Vol. 10. Bradt RC, Hasselman DPH, Munz D, et al, Eds. New York: Plenum, 1992: 119-133.
[77]
Gong JH, Wu JJ, Guan ZD. Analysis of the indentation size effect on the apparent hardness for ceramics. Mater Lett 1999, 38: 197-201.
[78]
Bückle H. Mikrohärteprüfung. Stuttgart, Germany: Berliner Union Verlag, 1965.