Drawing highly ordered MXene fibers from dynamically aggregated hydrogels

Assembly of two-dimensional (2D) nanomaterials into well-organized architectures is pivotal for controlling their function and enhancing performance. As a promising class of 2D nanomaterials, MXenes have attracted significant interest for use in wearable electronics due to their unique electrical and mechanical properties. However, facile approaches for fabricating MXenes into macroscopic fibers with controllable structures are limited. In this study, we present a strategy for easily spinning MXene fibers by incorporating polyanions. The introduction of poly(acrylic acid) (PAA) into MXene colloids has been found to alter MXene aggregation behavior, resulting in a reduced concentration threshold for lyotropic liquid crystal phase. This modification also enhances the viscosity and shear sensitivity of MXene colloids. Consequently, we were able to draw continuous fibers directly from the gel of MXene aggregated with PAA. These fibers exhibit homogeneous diameter and high alignment of MXene nanosheets, attributed to the shear-induced long-range order of the liquid crystal phase. Furthermore, we demonstrate proof-of-concept applications of the ordered MXene fibers, including textile-based supercapacitor, sensor and electrical thermal management, highlighting their great potential applied in wearable electronics. This work provides a guideline for processing 2D materials into controllable hierarchical structures by regulating aggregation behavior through the addition of ionic polymers.