Journal Home > Volume 12 , Issue 4
Nano Research 2019, 12(4): 801-808 https://doi.org/10.1007/s12274-019-2291-1
Research Article | Issue | Published: 25 January 2019

Self-supporting, eutectic-like, nanoporous biphase bismuth-tin film for high-performance magnesium storage

Show Author's Information Meijia Song1,§,  Jiazheng Niu1,§,  Kuibo Yin2,  Hui Gao1,  Chi Zhang3,  Wensheng Ma1,  Fakui Luo1,  Zhangquan Peng4,  Zhonghua Zhang1( )
Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education),School of Materials Science and Engineering, Shandong University, Jingshi Road 17923,Jinan,250061,China;
SEU-FEI Nano-Pico Center,Key Lab of MEMS of Ministry of Education, Southeast University,Nanjing,210096,China;
School of Applied Physics and Materials,Wuyi University, Dongcheng Village 22,Jiangmen,529020,China;
State Key Laboratory of Electroanalytical Chemistry,Changchun Institute of Applied Chemistry, Chinese Academy of Sciences,Changchun,130022,China;

§ Meijia Song and Jiazheng Niu contributed equally to this work.

Keywords:
hierarchically porous structure, magnesium ion batteries, alloying-type anode, biphase bismuth-tin film, magnetron cosputtering
Topics:
AnodesBismuthMagnesiumMetal ionsMetallic films PorosityTin
Cite this article:
Song M, Niu J, Yin K, et al. Self-supporting, eutectic-like, nanoporous biphase bismuth-tin film for high-performance magnesium storage. Nano Research, 2019, 12(4): 801-808. https://doi.org/10.1007/s12274-019-2291-1
Download citation
EndNote(RIS)
BibTeX

710

Views

29

Downloads

Citations

32

Crossref

N/A

WoS

28

Scopus

0

CSCD

Abstract Full text Electronic supplementary material About this article

Magnesium ion batteries are emerging as promising alternatives to lithium ion batteries because of their advantages including high energy density, dendrite-free features and low cost. Nevertheless, one of the major challenges for magnesium ion batteries is the kinetically sluggish magnesium insertion/extraction and diffusion in electrode materials. Aiming at this issue, biphase eutectic-like bismuth-tin film is designed herein to construct a self-supporting anode with interdigitated phase distribution and hierarchically porous structure, and further fabricated by a facile one-step magnetron cosputtering route. As benchmarked with single-phase bismuth or tin film, the biphase bismuth-tin film delivers high specific capacity (538 mAh/g at 50 mA/g), excellent rate performance (417 mAh/g at 1, 000 mA/g) and good cycling stability (233 mAh/g at the 200th cycle). The superior magnesium storage performance of the sputtered bismuth-tin film could be attributed to the synergetic effect of the interdigitated bismuth/tin phase distribution, hierarchically porous structure and biphase buffering matrices, which could increase ionic transport channels, shorten diffusion lengths and reduce total volume changes.


menu
Abstract
Full text
Outline
Electronic supplementary material
About this article

Self-supporting, eutectic-like, nanoporous biphase bismuth-tin film for high-performance magnesium storage

Show Author's information Meijia Song1,§, Jiazheng Niu1,§, Kuibo Yin2, Hui Gao1, Chi Zhang3, Wensheng Ma1, Fakui Luo1, Zhangquan Peng4, Zhonghua Zhang1( )
Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education),School of Materials Science and Engineering, Shandong University, Jingshi Road 17923,Jinan,250061,China;
SEU-FEI Nano-Pico Center,Key Lab of MEMS of Ministry of Education, Southeast University,Nanjing,210096,China;
School of Applied Physics and Materials,Wuyi University, Dongcheng Village 22,Jiangmen,529020,China;
State Key Laboratory of Electroanalytical Chemistry,Changchun Institute of Applied Chemistry, Chinese Academy of Sciences,Changchun,130022,China;

§ Meijia Song and Jiazheng Niu contributed equally to this work.

Abstract

Magnesium ion batteries are emerging as promising alternatives to lithium ion batteries because of their advantages including high energy density, dendrite-free features and low cost. Nevertheless, one of the major challenges for magnesium ion batteries is the kinetically sluggish magnesium insertion/extraction and diffusion in electrode materials. Aiming at this issue, biphase eutectic-like bismuth-tin film is designed herein to construct a self-supporting anode with interdigitated phase distribution and hierarchically porous structure, and further fabricated by a facile one-step magnetron cosputtering route. As benchmarked with single-phase bismuth or tin film, the biphase bismuth-tin film delivers high specific capacity (538 mAh/g at 50 mA/g), excellent rate performance (417 mAh/g at 1, 000 mA/g) and good cycling stability (233 mAh/g at the 200th cycle). The superior magnesium storage performance of the sputtered bismuth-tin film could be attributed to the synergetic effect of the interdigitated bismuth/tin phase distribution, hierarchically porous structure and biphase buffering matrices, which could increase ionic transport channels, shorten diffusion lengths and reduce total volume changes.

Keywords: hierarchically porous structure, magnesium ion batteries, alloying-type anode, biphase bismuth-tin film, magnetron cosputtering

References(77)

1

Dunn, B.; Kamath, H.; Tarascon, J. M. Electrical energy storage for the grid: A battery of choices. Science 2011, 334, 928-935.
DOI Google Scholar
2

Aurbach, D.; Lu, Z.; Schechter, A.; Gofer, Y.; Gizbar, H.; Turgeman, R.; Cohen, Y.; Moshkovich, M.; Levi, E. Prototype systems for rechargeable magnesium batteries. Nature 2000, 407, 724-727.
DOI Google Scholar
3

Orikasa, Y.; Masese, T.; Koyama, Y.; Mori, T.; Hattori, M.; Yamamoto, K.; Okado, T.; Huang, Z. D.; Minato, T.; Tassel, C. et al. High energy density rechargeable magnesium battery using earth-abundant and non-toxic elements. Sci. Rep. 2014, 4, 5622.
DOI Google Scholar
4

Mohtadi, R.; Mizuno, F. Magnesium batteries: Current state of the art, issues and future perspectives. Beilstein J. Nanotechnol. 2014, 5, 1291-1311.
DOI Google Scholar
5

Saha, P.; Datta, M. K.; Velikokhatnyi, O. I.; Manivannan, A.; Alman, D.; Kumta, P. N. Rechargeable magnesium battery: Current status and key challenges for the future. Prog. Mater. Sci. 2014, 66, 1-86.
DOI Google Scholar
6

NuLi, Y.; Yang, J.; Li, Y. S.; Wang, J. L. Mesoporous magnesium manganese silicate as cathode materials for rechargeable magnesium batteries. Chem. Commun. 2010, 46, 3794-3796.
DOI Google Scholar
7

NuLi, Y.; Zheng, Y. P.; Wang, Y.; Yang, J.; Wang, J. L. Electrochemical intercalation of Mg2+ in 3D hierarchically porous magnesium cobalt silicate and its application as an advanced cathode material in rechargeable magnesium batteries. J. Mater. Chem. 2011, 21, 12437-12443.
DOI Google Scholar
8

Ling, C.; Banerjee, D.; Song, W.; Zhang, M. J.; Matsui, M. First-principles study of the magnesiation of olivines: Redox reaction mechanism, electrochemical and thermodynamic properties. J. Mater. Chem. 2012, 22, 13517-13523.
DOI Google Scholar
9

Rasul, S.; Suzuki, S.; Yamaguchi, S.; Miyayama, M. High capacity positive electrodes for secondary Mg-ion batteries. Electrochim. Acta 2012, 82, 243-249.
DOI Google Scholar
10

Zhang, R. G.; Arthur, T. S.; Ling, C.; Mizuno, F. Manganese dioxides as rechargeable magnesium battery cathode; synthetic approach to understand magnesiation process. J. Power Sources 2015, 282, 630-638.
DOI Google Scholar
11

Nam, K. W.; Kim, S.; Lee, S.; Salama, M.; Shterenberg, I.; Gofer, Y.; Kim, J. S.; Yang, E.; Park, C. S.; Kim, J. S. et al. The high performance of crystal water containing manganese birnessite cathodes for magnesium batteries. Nano Lett. 2015, 15, 4071-4079.
DOI Google Scholar
12

Gershinsky, G.; Yoo, H. D.; Gofer, Y.; Aurbach, D. Electrochemical and spectroscopic analysis of Mg2+ intercalation into thin film electrodes of layered oxides: V2O5 and MoO3. Langmuir 2013, 29, 10964-10972.
DOI Google Scholar
13

Wang, Z. G.; Su, Q. L.; Deng, H. Q. Single-layered V2O5 a promising cathode material for rechargeable Li and Mg ion batteries: An ab initio study. Phys. Chem. Chem. Phys. 2013, 15, 8705-8709.
DOI Google Scholar
14

Tepavcevic, S.; Liu, Y. Z.; Zhou, D. H.; Lai, B.; Maser, J.; Zuo, X. B.; Chan, H.; Král, P.; Johnson, C. S.; Stamenkovic, V. et al. Nanostructured layered cathode for rechargeable Mg-ion batteries. ACS Nano 2015, 9, 8194-8205.
DOI Google Scholar
15

Liu, Y. C.; Jiao, L. F.; Wu, Q.; Du, J.; Zhao, Y. P.; Si, Y. C.; Wang, Y. J.; Yuan, H. T. Sandwich-structured graphene-like MoS2/C microspheres for rechargeable Mg batteries. J. Mater. Chem. A 2013, 1, 5822-5826.
DOI Google Scholar
16

Liu, Y. C.; Jiao, L. F.; Wu, Q.; Zhao, Y. P.; Cao, K. Z.; Liu, H. Q.; Wang, Y. J.; Yuan, H. T. Synthesis of rGO-supported layered MoS2 for high-performance rechargeable Mg batteries. Nanoscale 2013, 5, 9562-9567.
DOI Google Scholar
17

Liang, Y. L.; Feng, R. J.; Yang, S. Q.; Ma, H.; Liang, J.; Chen, J. Rechargeable Mg batteries with graphene-like MoS2 cathode and ultrasmall mg nanoparticle anode. Adv. Mater. 2011, 23, 640-643.
DOI Google Scholar
18

Song, J.; Sahadeo, E.; Noked, M.; Lee, S. B. Mapping the challenges of magnesium battery. J. Phys. Chem. Lett. 2016, 7, 1736-1749.
DOI Google Scholar
19

Yoo, H. D.; Shterenberg, I.; Gofer, Y.; Gershinsky, G.; Pour, N.; Aurbach, D. Mg rechargeable batteries: An on-going challenge. Energy Environ. Sci. 2013, 6, 2265-2279.
DOI Google Scholar
20

Shterenberg, I.; Salama, M.; Gofer, Y.; Levi, E.; Aurbach, D. The challenge of developing rechargeable magnesium batteries. MRS Bull. 2014, 39, 453-460.
DOI Google Scholar
21

Yoo, H. D.; Liang, Y. L.; Dong, H.; Lin, J. H.; Wang, H.; Liu, Y. S.; Ma, L.; Wu, T. P.; Li, Y. F.; Ru, Q. et al. Fast kinetics of magnesium monochloride cations in interlayer-expanded titanium disulfide for magnesium rechargeable batteries. Nat. Commun. 2017, 8, 339.
DOI Google Scholar
22

Pei, C. Y.; Xiong, F. Y.; Sheng, J. Z.; Yin, Y. M.; Tan, S. S.; Wang, D. D.; Han, C. H.; An, Q. Y.; Mai, L. Q. VO2 nanoflakes as the cathode material of hybrid magnesium-lithium-ion batteries with high energy density. ACS Appl. Mater. Interfaces 2017, 9, 17060-17066.
DOI Google Scholar
23

Muldoon, J.; Bucur, C. B.; Oliver, A. G.; Sugimoto, T.; Matsui, M.; Kim, H. S.; Allred, G. D.; Zajicek, J.; Kotani, Y. Electrolyte roadblocks to a magnesium rechargeable battery. Energy Environ. Sci. 2012, 5, 5941-5950.
DOI Google Scholar
24

Chakrabarti, S.; Biswas, K. DFT study of Mg2TiO4 and Ni doped Mg1.5Ni0.5TiO4 as electrode material for Mg ion battery application. J. Mater. Sci. 2017, 52, 10972-10980.
DOI Google Scholar
25

Liu, M.; Rong, Z. Q.; Malik, R.; Canepa, P.; Jain, A.; Ceder, G.; Persson, K. A. Spinel compounds as multivalent battery cathodes: A systematic evaluation based on ab initio calculations. Energy Environ. Sci. 2015, 8, 964-974.
DOI Google Scholar
26

Ichitsubo, T.; Adachi, T.; Yagi, S.; Doi, T. Potential positive electrodes for high-voltage magnesium-ion batteries. J. Mater. Chem. 2011, 21, 11764-11772.
DOI Google Scholar
27

Arthur, T. S.; Singh, N.; Matsui, M. Electrodeposited Bi, Sb and Bi1−xSbx alloys as anodes for Mg-ion batteries. Electrochem. Commun. 2012, 16, 103-106.
DOI Google Scholar
28

Singh, N.; Arthur, T. S.; Ling, C.; Matsui, M.; Mizuno, F. A high energy-density tin anode for rechargeable magnesium-ion batteries. Chem. Commun. 2013, 49, 149-151.
DOI Google Scholar
29

Shao, Y. Y.; Gu, M.; Li, X. L.; Nie, Z. M.; Zuo, P. J.; Li, G. S.; Liu, T. B.; Xiao, J.; Cheng, Y. W.; Wang, C. M. et al. Highly reversible mg insertion in nanostructured Bi for Mg ion batteries. Nano Lett. 2014, 14, 255-260.
DOI Google Scholar
30

Cheng, Y. W.; Shao, Y. Y.; Parent, L. R.; Sushko, M. L.; Li, G. S.; Sushko, P. V.; Browning, N. D.; Wang, C. M.; Liu, J. Interface promoted reversible Mg insertion in nanostructured tin-antimony alloys. Adv. Mater. 2015, 27, 6598-6605.
DOI Google Scholar
31

Tan, Y. H.; Yao, W. T.; Zhang, T. W.; Ma, T.; Lu, L. L.; Zhou, F.; Yao, H. B.; Yu, S. H. High voltage magnesium-ion battery enabled by nanocluster Mg3Bi2 alloy anode in noncorrosive electrolyte. ACS Nano 2018, 12, 5856-5865.
DOI Google Scholar
32

Winter, M.; Besenhard, J. O.; Spahr, M. E.; Novák, P. Insertion electrode materials for rechargeable lithium batteries. Adv. Mater. 1998, 10, 725-763.
DOI
33

Ji, L. W.; Lin, Z.; Alcoutlabi, M.; Zhang, X. W. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ. Sci. 2011, 4, 2682-2699.
DOI Google Scholar
34

Kim, S. W.; Seo, D. H.; Ma, X. H.; Ceder, G.; Kang, K. Electrode materials for rechargeable sodium-ion batteries: Potential alternatives to current lithium-ion batteries. Adv. Energy Mater. 2012, 2, 710-721.
DOI Google Scholar
35

Kim, H.; Kim, H.; Ding, Z.; Lee, M. H.; Lim, K.; Yoon, G.; Kang, K. Recent progress in electrode materials for sodium-ion batteries. Adv. Energy Mater. 2016, 6, 1600943.
DOI Google Scholar
36

Levi, E.; Levi, M. D.; Chasid, O.; Aurbach, D. A review on the problems of the solid state ions diffusion in cathodes for rechargeable Mg batteries. J. Electroceram. 2009, 22, 13-19.
DOI Google Scholar
37

Zhou, X. J.; Tian, J.; Hu, J. L.; Li, C. L. High rate magnesium-sulfur battery with improved cyclability based on metal-organic framework derivative carbon host. Adv. Mater. 2018, 30, 1704166.
DOI Google Scholar
38

Benmayza, A.; Ramanathan, M.; Singh, N.; Mizuno, F.; Prakash, J. Electrochemical and thermal studies of bismuth electrodes for magnesium-ion cells. J. Electrochem. Soc. 2015, 162, A1630-A1635.
DOI Google Scholar
39

Murgia, F.; Stievano, L.; Monconduit, L.; Berthelot, R. Insight into the electrochemical behavior of micrometric Bi and Mg3Bi2 as high performance negative electrodes for Mg batteries. J. Mater. Chem. A 2015, 3, 16478-16485.
DOI Google Scholar
40

Dileo, R. A.; Zhang, Q.; Marschilok, A. C.; Takeuchi, K. J.; Takeuchi, E. S. Composite anodes for secondary magnesium ion batteries prepared via electrodeposition of nanostructured bismuth on carbon nanotube substrates. ECS Electrochem. Lett. 2015, 4, A10-A14.
DOI Google Scholar
41

Ramanathan, M.; Benmayza, A.; Prakash, J.; Singh, N.; Mizuno, F. A porous electrode model for the magnesiation and demagnesiation of a bismuth electrode in rechargeable magnesium-ion cells. J. Electrochem. Soc. 2016, 163, A477-A487.
DOI Google Scholar
42

Wang, W.; Liu, L.; Wang, P. F.; Zuo, T. T.; Yin, Y. X.; Wu, N.; Zhou, J. M.; Wei, Y.; Guo, Y. G. A novel bismuth-based anode material with a stable alloying process by the space confinement of an in situ conversion reaction for a rechargeable magnesium ion battery. Chem. Commun. 2018, 54, 1714-1717.
DOI Google Scholar
43

Penki, T. R.; Valurouthu, G.; Shivakumara, S.; Sethuraman, V. A.; Munichandraiah, N. In situ synthesis of bismuth (Bi)/reduced graphene oxide (RGO) nanocomposites as high-capacity anode materials for a Mg-ion battery. New J. Chem. 2018, 42, 5996-6004.
DOI Google Scholar
44

Murgia, F.; Weldekidan, E. T.; Stievano, L.; Monconduit, L.; Berthelot, R. First investigation of indium-based electrode in Mg battery. Electrochem. Commun. 2015, 60, 56-59.
DOI Google Scholar
45

Periyapperuma, K.; Tran, T. T.; Purcell, M. I.; Obrovac, M. N. The reversible magnesiation of Pb. Electrochim. Acta 2015, 165, 162-165.
DOI Google Scholar
46

Kitada, A.; Kang, Y.; Uchimoto, Y.; Murase, K. Electrochemical reactivity of magnesium ions with Sn-based binary alloys (Cu-Sn, Pb-Sn, and In-Sn). ECS Trans. 2014, 58, 75-80.
DOI Google Scholar
47

Murgia, F.; Monconduit, L.; Stievano, L.; Berthelot, R. Electrochemical magnesiation of the intermetallic InBi through conversion-alloying mechanism. Electrochim. Acta 2016, 209, 730-736.
DOI Google Scholar
48

Murgia, F.; Laurencin, D.; Weldekidan, E. T.; Stievano, L.; Monconduit, L.; Doublet, M. L.; Berthelot, R. Electrochemical Mg alloying properties along the Sb1−xBix solid solution. Electrochim. Acta 2018, 259, 276-283.
DOI Google Scholar
49

Li, X.; Lai, C.; Xiao, C. W.; Gao, X. P. Enhanced high rate capability of dual-phase Li4Ti5O12-TiO2 induced by pseudocapacitive effect. Electrochim. Acta 2011, 56, 9152-9158.
DOI Google Scholar
50

Rahman, M. M.; Wang, J. Z.; Hassan, M. F.; Wexler, D.; Liu, H. K. Amorphous carbon coated high grain boundary density dual phase Li4Ti5O12-TiO2: A nanocomposite anode material for Li-ion batteries. Adv. Energy Mater. 2011, 1, 212-220.
DOI Google Scholar
51

Liu, G. Y.; Wang, H. Y.; Liu, G. Q.; Yang, Z. Z.; Jin, B.; Jiang, Q. C. Synthesis and electrochemical performance of high-rate dual-phase Li4Ti5O12-TiO2 nanocrystallines for Li-ion batteries. Electrochim. Acta 2013, 87, 218-223.
DOI Google Scholar
52

Gu, Y. X.; Zhu, Y. J.; Tang, Z. L.; Zhang, Y. H.; Yang, Y.; Wang, L. Design and synthesis of dual-phase Li4Ti5O12-TiO2 nanoparticles as anode material for lithium ion batteries. Mater. Lett. 2014, 131, 118-121.
DOI Google Scholar
53

Liao, J. Y.; Chabot, V.; Gu, M.; Wang, C. M.; Xiao, X. C.; Chen, Z. W. Dual phase Li4Ti5O12-TiO2 nanowire arrays as integrated anodes for high-rate lithium-ion batteries. Nano Energy 2014, 9, 383-391.
DOI Google Scholar
54

Wu, Q. L.; Xu, J. G.; Yang, X. F.; Lu, F. Q.; He, S. M.; Yang, J. L.; Fan, H. J.; Wu, M. M. Ultrathin anatase TiO2 nanosheets embedded with TiO2-B nanodomains for lithium-ion storage: Capacity enhancement by phase boundaries. Adv. Energy Mater. 2015, 5, 1401756.
DOI Google Scholar
55

Chen, S. H.; Chen, C. C.; Chao, C. G. Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires. J. Alloys Compd. 2009, 481, 270-273.
DOI Google Scholar
56

Chadwick, G. A. Eutectic alloy solidification. Prog. Mater. Sci. 1963-1965, 12, 99-182.
DOI Google Scholar
57

Erlebacher, J.; Aziz, M. J.; Karma, A.; Dimitrov, N.; Sieradzki, K. Evolution of nanoporosity in dealloying. Nature 2001, 410, 450-453.
DOI Google Scholar
58

Liu, Z. G.; Lee, J.; Xiang, G. L.; Glass, H. F. J.; Keyzer, E. N.; Dutton, S. E.; Grey, C. P. Insights into the electrochemical performances of Bi anodes for Mg ion batteries using 25Mg solid state NMR spectroscopy. Chem. Commun. 2017, 53, 743-746.
DOI Google Scholar
59

Ellis, L. D.; Hatchard, T. D.; Obrovac, M. N. Reversible insertion of sodium in tin. J. Electrochem. Soc. 2012, 159, A1801-A1805.
DOI Google Scholar
60

Beattie, S. D.; Hatchard, T.; Bonakdarpour, A.; Hewitt, K. C.; Dahn, J. R. Anomalous, high-voltage irreversible capacity in tin electrodes for lithium batteries. J. Electrochem. Soc. 2003, 150, A701-A705.
DOI Google Scholar
61

Zhang, H. Y.; Ye, K.; Zhu, K.; Cang, R. B.; Yan, J.; Cheng, K.; Wang, G. L.; Cao, D. X. High-energy-density aqueous magnesium-ion battery based on a carbon-coated FeVO4 anode and a Mg-OMS-1 cathode. Chem. —Eur. J. 2017, 23, 17118-17126.
DOI Google Scholar
62

Du, H. P.; Zhang, Z. H.; He, J. J.; Cui, Z. L.; Chai, J. C.; Ma, J.; Yang, Z.; Huang, C. S.; Cui, G. L. A delicately designed sulfide graphdiyne compatible cathode for high-performance lithium/magnesium-sulfur batteries. Small 2017, 13, 1702277.
DOI Google Scholar
63

Tutusaus, O.; Mohtadi, R.; Singh, N.; Arthur, T. S.; Mizuno, F. Study of electrochemical phenomena observed at the Mg metal/electrolyte interface. ACS Energy Lett. 2017, 2, 224-229.
DOI Google Scholar
64

Li, X. G.; Gao, T.; Han, F. D.; Ma, Z. H.; Fan, X. L.; Hou, S.; Eidson, N.; Li, W. S.; Wang, C. S. Reducing Mg anode overpotential via ion conductive surface layer formation by iodine additive. Adv. Energy Mater. 2018, 8, 1701728.
DOI Google Scholar
65

Wu, Y. A.; Yin, Z. W.; Farmand, M.; Yu, Y. S.; Shapiro, D. A.; Liao, H. G.; Liang, W. I.; Chu, Y. H.; Zheng, H. M. In-situ multimodal imaging and spectroscopy of Mg electrodeposition at electrode-electrolyte interfaces. Sci. Rep. 2017, 7, 42527.
DOI Google Scholar
66

Hu, X. C.; Shi, Y.; Lang, S. Y.; Zhang, X.; Gu, L.; Guo, Y. G.; Wen, R.; Wan, L. J. Direct insights into the electrochemical processes at anode/electrolyte interfaces in magnesium-sulfur batteries. Nano Energy 2018, 49, 453-459.
DOI Google Scholar
67

Jin, W.; Li, Z. J.; Wang, Z. G.; Fu, Y. Q. Mg ion dynamics in anode materials of Sn and Bi for Mg-ion batteries. Mater. Chem. Phys. 2016, 182, 167-172.
DOI Google Scholar
68

Sun, X. Q.; Bonnick, P.; Duffort, V.; Liu, M.; Rong, Z. Q.; Persson, K. A.; Ceder, G.; Nazar, L. F. A high capacity thiospinel cathode for Mg batteries. Energy Environ. Sci. 2016, 9, 2273-2277.
DOI Google Scholar
69

Nguyen, D. T.; Tran, X. M.; Kang, J.; Song, S. W. Magnesium storage performance and surface film formation behavior of Tin anode material. ChemElectroChem 2016, 3, 1813-1819.
DOI Google Scholar
70

Jung, S. C.; Han, Y. K. Fast magnesium ion transport in the Bi/Mg3Bi2 two-phase electrode. J. Phys. Chem. C 2018, 122, 17643-17649.
DOI Google Scholar
71

Tanaka, Y.; Ikeda, M.; Sumita, M.; Ohno, T.; Takada, K. First-principles analysis on role of spinel (111) phase boundaries in Li4+3xTi5O12 Li-ion battery anodes. Phys. Chem. Chem. Phys. 2016, 18, 23383-23388.
DOI Google Scholar
72

Chu, C. X.; Yang, J.; Zhang, Q. Q.; Wang, N. N.; Niu, F. E.; Xu, X. N.; Yang, J.; Fan, W. L.; Qian, Y. T. Biphase-interface enhanced sodium storage and accelerated charge transfer: Flower-like anatase/bronze TiO2/C as an advanced anode material for Na-ion batteries. ACS Appl. Mater. Interfaces 2017, 9, 43648-43656.
DOI Google Scholar
73

Ding, X. K.; Zhang, L. L.; Yang, X. L.; Fang, H.; Zhou, Y. X.; Wang, J. Q.; Ma, D. Anthracite-derived dual-phase carbon-coated Li3V2(PO4)3 as high-performance cathode material for lithium ion batteries. ACS Appl. Mater. Interfaces 2017, 9, 42788-42796.
DOI Google Scholar
74

Li, K. K.; Li, B. H.; Wu, J. X.; Kang, F. Y.; Kim, J. K.; Zhang, T. Y. Ultrafast-charging and long-life Li-ion battery anodes of TiO2-B and anatase dual-phase nanowires. ACS Appl. Mater. Interfaces 2017, 9, 35917-35926.
DOI Google Scholar
75

Tian, Y.; Xu, G. B.; Wu, Z. L.; Zhong, J. X.; Yang, L. W. Dual-phase spinel Li4Ti5O12/anatase TiO2 nanosheet anchored 3D reduced graphene oxide aerogel scaffolds as self-supporting electrodes for high-performance Na- and Li-ion batteries. RSC Adv. 2017, 7, 52702-52711.
DOI Google Scholar
76

Wang, S. T.; Yang, Y.; Quan, W.; Hong, Y.; Zhang, Z. T.; Tang, Z. L.; Li, J. Ti3+-free three-phase Li4Ti5O12/TiO2 for high-rate lithium ion batteries: Capacity and conductivity enhancement by phase boundaries. Nano Energy 2017, 32, 294-301.
DOI Google Scholar
77

Parent, L. R.; Cheng, Y. W.; Sushko, P. V.; Shao, Y. Y.; Liu, J.; Wang, C. M.; Browning, N. D. Realizing the full potential of insertion anodes for Mg-ion batteries through the nanostructuring of Sn. Nano Lett. 2015, 15, 1177-1182.
DOI Google Scholar
File
12274_2019_2291_MOESM1_ESM.pdf (2.8 MB)
Publication history
Copyright
Acknowledgements

Publication history

Received: 13 October 2018
Revised: 12 December 2018
Accepted: 04 January 2019
Published: 25 January 2019
Issue date: April 2019

Copyright

© Tsinghua University Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Acknowledgements

Acknowledgements

The authors gratefully acknowledge financial support by National Natural Science Foundation of China (Nos. 51671115 and 51871133), the support of Department of Science and Technology of Shandong Province for Young Tip-top Talent Support Project, and Young Tip-top Talent Support Project (the Organization Department of the Central Committee of the CPC).

Return