Journal Home > Volume 9 , Issue 4

Performance modulation of ZnO optoelectronic devices in the presence of proper piezoelectric polarization charges has been widely reported, whereas relatively less work has been performed about the influence of photoexcitation on piezotronics. In this study, we experimentally investigated the performance evolution of ZnO piezotronic strain sensor under various 365 nm UV irradiation densities. The device demonstrated a response ratio of ~200 under no illumination and under ~0.53% compressive strain, and the response time is approximately 0.3 s. However, tremendous performance degradation was observed with the increase in the illumination density, which is attributed to the UV-modulated change in the free electron concentration and Schottky barrier height. It was observed that increased carrier density intensifies the screening effect and thus, the modulation ability of piezo-polarization charges weakens. Meanwhile, the deterioration of rectifying behavior at the interface under UV illumination also jeopardizes the device performance.

Publication history
Copyright
Acknowledgements

Publication history

Received: 02 November 2015
Revised: 03 January 2016
Accepted: 04 January 2016
Published: 01 March 2016
Issue date: April 2016

Copyright

© Tsinghua University Press and Springer-Verlag Berlin Heidelberg 2016

Acknowledgements

Acknowledgements

This work was supported by the National Basic Research Program of China (No. 2013CB932602), the Program of Introducing Talents of Discipline to Universities (No. B14003), National Natural Science Foundation of China (Nos. 51527802 and 51232001), Beijing Municipal Science & Technology Commission, and the Fundamental Research Funds for Central Universities.

Return