Journal Home > Volume 7 , Issue 4

In this report we explore the structural and optical properties of GaAs/AlGaAs heterostructure nanowires grown by metalorganic vapour phase epitaxy using gold seed-particles. The optical studies were done by low-temperature cathodoluminescence (CL) in a scanning electron microscope (SEM). We perform a systematic investigation of how the nanowire growth-temperature affects the total photon emission, and variations in the emission energy and intensity along the length of the nanowires. The morphology and crystal structures of the nanowires were investigated using SEM and transmission electron microscopy (TEM). In order to correlate specific photon emission characteristics with variations in the nanowire crystal structure directly, TEM and spatially resolved CL measurements were performed on the same individual nanowires. We found that the main emission energy was located at around 1.48 eV, and that the emission intensity was greatly enhanced when increasing the GaAs nanowire core growth temperature. The data strongly suggests that this emission energy is related to rotational twins in the GaAs nanowire core. Our measurements also show that radial overgrowth by GaAs on the GaAs nanowire core can have a deteriorating effect on the optical quality of the nanowires. Finally, we conclude that an in situ pre-growth annealing step at a sufficiently high temperature significantly improves the optical quality of the nanowires.

File
12274_2014_414_MOESM1_ESM.pdf (928.8 KB)
Publication history
Copyright
Acknowledgements

Publication history

Received: 01 September 2013
Revised: 15 December 2013
Accepted: 12 January 2014
Published: 01 April 2014
Issue date: April 2014

Copyright

© Tsinghua University Press and Springer-Verlag Berlin Heidelberg 2014

Acknowledgements

Acknowledgements

This work was supported by the Nanometer Consortium at Lund University (nm@LU), the Swedish Research Council (VR), the Swedish Foundation for Strategic Research (SFF) and the Knut and Alice Wallenberg foundation (KAW). The growth was done using an MOVPE of Lund Nanofabrication Lab. The authors would like to thank Niklas Sköld for valuable inputs to the discussions.

Return