AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (5.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Octylamine-Supporting Interlayer Expanded Molybdenum Diselenide as a High-Power Cathode for Rechargeable Mg Batteries

Dong Chen1, Xin Ren1, Ting Li2 ( ), Zhongxue Chen1, Yuliang Cao3 , Fei Xu1 ( )
Key Laboratory of Hydraulic Machinery Transients, Ministry of Education, School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China
Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission & Ministry of Education, College of Chemistry and Materials Science, South-Central University for Nationalities, Wuhan 430074, China
Hubei Key Lab of Electrochemical Power Sources, College of Chemistry & Molecular Science, Wuhan University, Wuhan 430072, China
Show Author Information

Abstract

Rechargeable Mg batteries (RMBs) are a promising large-scale energy-storage technology with low cost and high safety, but the performance is limited by the inferior kinetics of Mg-intercalation cathodes. In the present study, an octylamine-supporting interlayer expanded molybdenum diselenide (e-MoSe2) is synthesized and used as cathode for RMBs, in comparison with ordinary crystalline MoSe2. The octylamine molecules introduced show a strong interaction with the MoSe2 layers and increase the layer spacing significantly from 6.46 to 11.5 Å. e-MoSe2 shows a high Mg-storage capacity of 238 mAh g−1 at 50 mA g−1 and a superior rate performance of 39 mAh g−1 at 10 A g−1, far advantageous over crystalline MoSe2. e-MoSe2 also shows a considerably high structure stability during repeated magnesiation/demagnesiation, providing an outstanding cycling stability for 1000 cycles. Further electrochemical tests demonstrate the high Mg2+ diffusion coefficients in e-MoSe2. Theoretical computation indicates the interlayer expansion changes the Mg2+ diffusion paths from “hollow site → hollow site” to “hollow site → Se atom site → hollow site”, largely decreasing the energy barrier and improving the Mg2+ diffusion kinetics. The present work highlights an efficient strategy for the improvement of Mg-storage performance for RMB cathodes.

Electronic Supplementary Material

Download File(s)
eem-6-6-e12486_ESM.docx (3.8 MB)

References

【1】
【1】
 
 
Energy & Environmental Materials

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Chen D, Ren X, Li T, et al. Octylamine-Supporting Interlayer Expanded Molybdenum Diselenide as a High-Power Cathode for Rechargeable Mg Batteries. Energy & Environmental Materials, 2023, 6(6). https://doi.org/10.1002/eem2.12486

564

Views

3

Downloads

18

Crossref

17

Web of Science

20

Scopus

2

CSCD

Received: 29 May 2022
Revised: 11 July 2022
Published: 12 July 2022
© 2022 The Authors.

This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.