AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (4.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article

Thin NASICON Electrolyte to Realize High Energy Density Solid-State Sodium Metal Battery

Jin An Sam Oh1 ( ), Xiaoyu Xu2, Zhihan Zeng2, Kexin Wang2, Nicholas Yew Jin Tan2, Eugene Kok1, Jiemin Huang1, Li Lu2( )
Singapore Institute of Manufacturing Technology, A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, Singapore City 138634, Singapore
Department of Mechanical Engineering, National University of Singapore, Singapore City 117575, Singapore
Show Author Information

Abstract

The solid-state electrolyte in a solid-state battery acts as an electrons' barrier and an ions' bridge between the two electrodes. As solid-state electrolyte does not store the mobile ions, it is necessary to achieve a thin solid-state electrolyte to reduce the internal resistance and enhance the energy density. In this work, a thin NASICON solid-state electrolyte, with a stoichiometry of Na3Zr2Si2PO12, is fabricated by the tape-casting method and its thickness can be easily controlled by the gap between substrate and scraper. The areal-specific resistance and the flexural strength increase with the electrolyte thickness. A solid-state sodium metal battery with 86 μm thick Na3Zr2Si2PO12 exhibits a reversible specific capacity of 73–78 mAh g−1 with a redox potential of 3.4 V at 0.2 C. This work presents the importance of electrolyte thickness to reduce internal resistance and achieve a high energy density for sodium batteries.

Electronic Supplementary Material

Download File(s)
eem-6-6-e12472_ESM.docx (3.9 MB)

References

【1】
【1】
 
 
Energy & Environmental Materials

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Oh JAS, Xu X, Zeng Z, et al. Thin NASICON Electrolyte to Realize High Energy Density Solid-State Sodium Metal Battery. Energy & Environmental Materials, 2023, 6(6). https://doi.org/10.1002/eem2.12472

739

Views

6

Downloads

27

Crossref

29

Web of Science

27

Scopus

0

CSCD

Received: 13 March 2022
Revised: 05 June 2022
Published: 03 July 2022
© 2022 Zhengzhou University.