AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.4 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article

Oriented Organization of Poly(3-Hexylthiophene) for Efficient and Stable Antimony Sulfide Solar Cells

Jinxiang Gao1,2, Rongfeng Tang1,2( ), Huiling Cai1,2, Zhiyuan Cai1,2, Peng Xiao1, Gang Li1,2, Chenhui Jiang1, Changfei Zhu1,2( ), Tao Chen1,2 ( )
CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, School of Chemistry and Materials Science, University of Science and Technology of China, Hefei 230041, China
Institute of Energy, Hefei Comprehensive National Science Center, Hefei 230041, China
Show Author Information

Abstract

Poly(3-hexylthiophene) (P3HT), as a traditional organic hole-transporting material (HTM), is widely used in thin-film solar cells due to its high charge mobility and good thermal stability. However, the P3HT films obtained by the traditional method are amorphous, which is unfavorable to hole extraction and transport. Here, a low-toxicity solvent 1,2,4-trimethylbenzene (TMB) was used as the solvent instead of the commonly used halogen solvent chlorobenzene (CB) to dissolve P3HT. Thus, the self-assembled nanofibrous P3HT film was prepared and applied as HTM in the newly emerged Sb2S3 solar cells. According to the density functional theory calculations, the interface contact between TMB-P3HT and Sb2S3 was enhanced via the bonding interaction of S in P3HT and Sb in Sb2S3. Through transient absorption spectroscopy characterization, the enhanced interface contact improves the charge extraction ability of TMB-P3HT when compared to the CB-P3HT film. Thus, the TMB-P3HT-based Sb2S3 solar cell delivers a power conversion efficiency of 6.21%, which is 9.7% higher than that of the CB-P3HT-based device. Furthermore, the dopant-free TMB-P3HT-based Sb2S3 devices exhibit excellent environmental stability compared with Spiro-OMeTAD-based devices. This work demonstrates that the application of P3HT and the solvent engineering of HTM are applicable strategies for developing Sb2S3 solar cells with high efficiency and stability.

Electronic Supplementary Material

Download File(s)
eem-6-6-e12453_ESM.docx (2.8 MB)

References

【1】
【1】
 
 
Energy & Environmental Materials

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Gao J, Tang R, Cai H, et al. Oriented Organization of Poly(3-Hexylthiophene) for Efficient and Stable Antimony Sulfide Solar Cells. Energy & Environmental Materials, 2023, 6(6). https://doi.org/10.1002/eem2.12453

631

Views

3

Downloads

11

Crossref

10

Web of Science

11

Scopus

0

CSCD

Received: 31 March 2022
Revised: 28 April 2022
Published: 31 May 2022
© 2022 Zhengzhou University.