@article{MA2026, 
author = {Zhengzheng MA and Hongliang ZHENG and Cuihong PAN and Yanan TIAN and Hongfei ZHOU},
title = {Formation mechanism and suppression method of out-of-plane buckling defect of unidirectional prepreg},
year = {2026},
journal = {Journal of Aeronautical Materials},
volume = {46},
number = {11},
pages = {77-85},
keywords = {prepreg, appearance defect, out-of-plane buckling, defect formation mechanism, suppression method},
url = {https://www.sciopen.com/article/10.11868/j.issn.1005-5053.2026.000018},
doi = {10.11868/j.issn.1005-5053.2026.000018},
abstract = {Prepreg is one of the raw materials for the efficient preparation of composite components. Identifying and improving its appearance defects is of great significance for improving the preparation and use efficiency of prepreg. In this work, aiming at the out-of-plane buckling defect of unidirectional prepreg after cutting and standing, the mechanism and main influencing factors of the defect are studied by aging analysis method, process parameter experiment and process auxiliary material comparison test. The results show that the spontaneous out-of-plane buckling defect of unidirectional prepreg is due to the accumulation of tensile deformation of release paper during the production process. After cutting, the aging shrinkage of release paper induces the debonding of prepreg and release paper to form out-of-plane buckling defect. The formation process of this defect is a pure physical change, which has little effect on the resin content of prepreg. The process comparison test shows that the rotation speed difference between the rollers in the prepreg production process is the main reason for the deformation accumulation of the release paper. The comparison test of process aids shows that the use of high modulus release paper for prepreg preparation can effectively inhibit the occurrence of out-of-plane buckling defects.}
}