@article{HOU2026, 
author = {Jiaxin HOU and Zhiran ZHENG and Dianrui ZHOU and Fenghui SHI and Baoyan ZHANG},
title = {Effect of carbon fiber pretreatment temperature on 0° tensile properties of polyether ether ketone thermoplastic prepreg},
year = {2026},
journal = {Journal of Aeronautical Materials},
volume = {46},
number = {11},
pages = {86-99},
keywords = {thermoplastic prepreg, carbon fiber, tensile property, polyetherethecketone, polymer crystallization},
url = {https://www.sciopen.com/article/10.11868/j.issn.1005-5053.2025.000228},
doi = {10.11868/j.issn.1005-5053.2025.000228},
abstract = {Several groups of thermoplastic polyether ether ketone (PEEK) prepregs with different process parameters by adjusting the pretreatment temperature of carbon fiber are prepared, and the physicochemical properties, 0-degree tensile properties and microstructure of each group of thermoplastic prepregs are characterized. The results show that the pretreatment temperature of carbon fiber is increased from 300 ℃ to 450 ℃, and the 0° tensile strength of thermoplastic prepreg is increased from 1834.4 MPa to 2258.7 MPa, an increase of more than 20%. Meanwhile, the crystallization state of PEEK induced by heat-treated carbon fiber is observed by polarizing microscopy. Combined with test results of carbon fiber surface element distribution obtained via X-ray photoelectron spectroscopy (XPS), it is found that the heat-treated carbon fiber can significantly improve the tendency of PEEK heterogeneous nucleation, which has an impact on the crystallization process of PEEK.}
}