@article{CHEN2026, 
author = {Mo CHEN and Rong JIANG and Yue WANG and Xiaoyu LI and Yingdong SONG},
title = {Effects of stress ratio and temperature on high-cycle fatigue properties of a single crystal superalloy containing Ru},
year = {2026},
journal = {Journal of Aeronautical Materials},
volume = {46},
number = {11},
pages = {36-45},
keywords = {Ni-based single crystal superalloy, high-cycle fatigue, stress ratio, temperature, dislocation},
url = {https://www.sciopen.com/article/10.11868/j.issn.1005-5053.2025.000178},
doi = {10.11868/j.issn.1005-5053.2025.000178},
abstract = {The high-cycle fatigue performance of a novel Ru-containing single crystal superalloy is investigated under different stress ratios (0.1, 0.3, and 0.5) and various temperatures (850, 900, 1000, and 1050 ℃). The results show that the fatigue strength of the alloy decreases with the increase of stress ratio, and rises firstly and then drops with increasing temperature, reaching the maximum value at 1000 ℃. Fracture surface morphology is characterized by scanning electron microscopy (SEM). It is found that the fatigue fracture of specimens tested at different stress ratios and temperatures exhibits quasi-cleavage fracture features, and cracks propagate along {111} and {001} planes. As the stress ratio increases, the fracture area of {001} planes perpendicular to the stress axis increases significantly, accompanied by aggravated plastic deformation. Transmission electron microscopy (TEM) is employed to observe the microstructure and dislocation configuration after fatigue deformation. The observations reveal that increasing stress ratio leads to a marked rise in dislocation density. Dislocation pile-ups and dislocation networks form within the γ matrix channels and cut into the γ′ precipitates, which induces dissolution and deformation of γ′ phase. With rising temperature, the γ matrix channels widen. Misfit dislocations are generated under applied stress, which is beneficial to improving the high-temperature mechanical properties of single-crystal superalloys within a certain temperature range.}
}