@article{GE2026, 
author = {XiaoGang GE and Jun ZHANG and MengLong HAO and JianFeng LIU and HaiXia WANG},
title = {Effect of polyolefin polyol content on polyurethane elastomer structure and performance},
year = {2026},
journal = {Journal of Beijing University of Chemical Technology (Natural Science Edition)},
volume = {53},
number = {5},
pages = {52-57},
keywords = {polyolefin polyol, polyurethane, elastomer, microphase separation, glass transition temperature (Tg)},
url = {https://www.sciopen.com/article/10.13543/j.bhxbzr.2026.05.006},
doi = {10.13543/j.bhxbzr.2026.05.006},
abstract = {Polyurethane elastomers were prepared in a one-step method with polyolefin polyols bearing long side chains, liquefied diphenylmethane diisocyanate, and 2-ethyl-1,3-hexanediol as raw materials. The effect of polyolefin polyol content on the chemical structure, mechanical properties, water resistance, thermal stability, and thermal transition behavior of the polyurethane elastomers was investigated. The results showed that as the polyolefin polyol content decreased, the hardness of the polyurethane elastomers gradually increased, the tensile strength first increased and then decreased, and the elongation at break gradually decreased. When the polyolefin polyol content was 60%, the tensile strength reached a maximum value of 6.2 MPa, with a corresponding elongation at break of 283%. The polyurethane elastomers exhibited excellent water resistance, with a water absorption rate below 0.5% and a water contact angle greater than 98°. The initial thermal decomposition temperature (Td5%) gradually decreased with decreasing polyolefin polyol content reaching a minimum value of 291 ℃. The soft and hard segments in the polyurethane elastomers exhibited independent glass transition temperatures that showed little variation (the differences between the maximum and minimum values were 1.3 ℃ and 0.7 ℃, respectively), demonstrating the presence of a clear microphase-separated structure in the polyurethane elastomers.}
}