@article{Li2026, 
author = {Hang Li and Chen Yang and Shijing Xie and Junqin Shi and Xiaoli Fan and Tengfei Cao and Bin Zhao and Jie Wang and Shaowei Feng},
title = {From wall slip to intralayer shear: How surface asperities regulate friction in nanoconfined glycerol lubrication},
year = {2026},
journal = {Friction},
keywords = {Nanoconfined lubrication, Surface asperity, Slip mode transition, Liquid superlubricity},
url = {https://www.sciopen.com/article/10.26599/FRICT.2026.9441337},
doi = {10.26599/FRICT.2026.9441337},
abstract = {Reducing friction at the nanoscale to minimize energy losses remains a significant challenge, as a substantial amount of energy is currently lost to friction and wear at tribological contact interfaces. Here, a comprehensive physical understanding is provided of how the transition from smooth to rough interfaces alters slip modes and energy dissipation pathways in high-viscosity glycerol. Through nonequilibrium molecular dynamics simulations of glycerol confined between hydroxylated SiO2 and CH-terminated surfaces with controlled asperity heights (0–6.4 Å) and film thicknesses (2–8 molecular layers), we identify that surface asperity height serves as the key regulator for slip mode transition. The results reveal that the wall slip of lubricating film appears on the non-polar CH-terminated surface with low roughness (h ≤ 3.2 Å). Because only discrete asperity heights were examined, we believe that the transition occurs between the tested values of 3.2 and 4.8 Å, with a high-dissipation mixed mode involving wall slip and intralayer shear first observed at h = 4.8 Å. This transition leads to dramatic increases in both friction coefficient and heat dissipation rate, which rise by more than two orders of magnitude as h increases from 0 to 6.4 Å. Force analysis demonstrates that the increased friction resistance primarily originates from the “wedge effect” and lubricant accumulation in the uphill regions. These findings suggest that for high-viscosity lubricants like glycerol, minimizing asperity height to promote 2D-like interfacial slip represents a robust strategy for achieving heterogeneous interface superlubricity.}
}