@article{Liu2026, 
author = {Zhichun Liu and Junyang Chen and Heng Wang and Haigang Wang and Mingyang Kong and Zhe Yang and Libo Gao and Yang Zhao and Zhixuan Su and Mao Chen and Bingbing Fan and Zhenyin Hai and Chenyang Xue and Enbo Feng and Junsheng Liang},
title = {Electrical insulation enhancement of the Al2O3 composite films at high temperature by oxygen vacancy suppression},
year = {2026},
journal = {Journal of Advanced Ceramics},
keywords = {Al2O3 film, gas–liquid phase composite, high-temperature electrical insulation, electrohydrodynamic jet printing, magnetron sputtering},
url = {https://www.sciopen.com/article/10.26599/JAC.2026.9221397},
doi = {10.26599/JAC.2026.9221397},
abstract = {Electrical insulation films are critical for the reliable operation of ultrahigh-temperature thin-film sensors (UTTSs) at elevated temperatures. However, the resistance of the insulation film easily declines at high temperatures due to the formation of oxygen vacancies and through-type defects, which will affect the long-term stability and reliability of the UTTSs. Here, we report a novel gas–liquid phase composite strategy to fabricate Al2O3 composite insulation films. An Al2O3 bottom film was first deposited by liquid-phase electrohydrodynamic jet printing, followed by the deposition of a dense Al2O3 film by magnetron sputtering. This design not only effectively repairs through-type defects in the liquid-phase film and improves overall densification but also suppresses the formation of oxygen vacancies in films. The gas-phase Al2O3 (G-Al2O3)/liquid-phase Al2O3 (L-Al2O3) composite film exhibits a smooth surface with substantially reduced microcracks and porosity. X-ray photoelectron spectroscopy reveals a significantly lower relative oxygen vacancy level in the composite films than in the pure L-Al2O3 film. Consequently, the G-Al2O3/L-Al2O3 film achieves an insulation resistance of 44 kΩ at 1400 °C, an order of magnitude higher than that of the pure L-Al2O3 film. In addition, three thermal cycles between 800 and 1200 °C demonstrate excellent repeatability of the insulation resistance within this temperature range. Practically, the Al2O3 composite films were applied to thin-film strain gauges (TFSGs), and the TFSGs exhibited excellent performance at high temperatures.}
}