@article{LI2026, 
author = {Hongchao LI and Qipeng ZHANG and Haoxuan HAN and Yulian SHI and Chengxing SHEN and Mei ZHANG and Yue LONG},
title = {Influence of delay time between holes on the time-frequency characteristics of blast vibration propagation based on Monte Carlo method},
year = {2026},
journal = {Explosion and Shock Waves},
volume = {46},
number = {8},
keywords = {randomness of blasting vibrations, blasting vibration prediction model, Monte Carlo method, analysis of blasting vibration characteristics},
url = {https://www.sciopen.com/article/10.11883/bzycj-2025-0295},
doi = {10.11883/bzycj-2025-0295},
abstract = {To investigate the influence of inter-hole delay on the intensity and frequency characteristics of blasting vibrations, an effective simulation of single-hole blasting vibration waveforms was achieved based on a single-hole blasting vibration prediction model. Subsequently, incorporating Blair's nonlinear superposition theory, a group-hole blasting vibration prediction model was constructed that can reflect the nonlinear vibration relationship between holes. Using a copper mine in Jiangxi Province as the engineering context, the constrained-traversal algorithm was employed to optimize the parameters of the single-hole prediction model. The simulated waveform output by this model exhibits a peak velocity error of 0.7% compared to the measured single-hole waveform, with identical predictions for the dominant frequency. The peak velocity error between the simulated waveform output by the group-hole blast vibration prediction model and the measured group-hole waveform is 3.9%, with the dominant frequency prediction being completely consistent. This fully validates the effectiveness of both the single-hole and group-hole blast vibration prediction models. Based on dual-hole blasting vibration experiments, employing Monte Carlo methodology, the model generated 1000 sets of single-hole simulated waveforms. From these, 500 sets of dual-hole blasting vibration waveform characteristics (peak velocity, dominant frequency, and energy distribution across frequency bands) were extracted to construct a sample set. Subsequently, statistical analysis was conducted on the damping rate, dominant frequency, and energy distribution across frequency bands for the superimposed vibration waves of dual-hole blasts at different delay times and blast center distances, using the upper limit of the 95% confidence interval and the mean value. Results indicate that at the same blast center distance, as the delay time increases, the damping rate first increases and then stabilizes. At the same time the dominant frequency gradually decreases, with high-frequency energy progressively shifting toward low-frequency energy. At different blast centers, as the blast center distance increases, the damping rate generally decreases across various delay times. The dominant frequency shifts toward lower frequencies, resulting in an overall increase in low-frequency energy and an overall decrease in high-frequency energy. The Monte Carlo method, based on extensive simulations and statistical analysis, not only reveals the random characteristics of blasting vibration signals, but also enables quantitative analysis of their time-domain and frequency-domain features, holding significant theoretical and engineering value.}
}