TY  - JOUR
AU  - Yang, Qingshan
AU  - Liu, Guanglin
AU  - Yan, Hongwei
AU  - Zhang, Dan
AU  - Zhang, Jianyue
AU  - Du, Ruibo
AU  - Yue, Liyang
PY  - 2025
TI  - Grain orientation design via gradient strain path for enhanced strength-ductility synergy in AZ31 Magnesium alloy sheets
JO  - Journal of Magnesium and Alloys
SN  - 2213-9567
SP  - 5217
EP  - 5228
VL  - 13
IS  - 10
AB  - The room-temperature ductility of magnesium (Mg) alloys is fundamentally limited by preferential basal slip activation—a challenge directly addressable through strategic grain orientation tailoring. In this study, gradient compressive strain paths are utilized through a 25° inclined die to tailor the crystallographic textures of AZ31 sheets. Precisely controlled deformation induces a triaxial stress state that rotates basal-oriented grains into gradient {10–12} twin-dominated configurations, while concurrently generating gradient geometrically necessary dislocations (GNDs). This microstructural duality synergistically activates pyramidal 〈c + a〉 slip systems, demonstrated by Schmid factor (SF) elevation from 0.12 to 0.38, and triggers the hetero-deformation-induced (HDI) strengthening mechanism. The engineered sheets achieve 422 MPa ultimate tensile strength (UTS) with 32.7% elongation (EL), representing 13% and 76% enhancements over conventional counterparts. Twin-mediated strain delocalization enables uniform thickness deformation, culminating in a record 7.7 mm limiting dome height at room temperature. These results indicate that grain orientation design is a critical pathway to transcend magnesium’s intrinsic deformation constraints.
UR  - https://doi.org/10.1016/j.jma.2025.08.028
DO  - 10.1016/j.jma.2025.08.028