@article{Farrokhnejad2026, 
author = {Mehdi Farrokhnejad and J.P. Weiler and Jilong Zhang and Mingzhi Mao and Long Cheng and Chen Liu and Zongyu Li},
title = {High pressure die casting (HPDC) tool design & process considerations for a mega-sized magnesium lift gate},
year = {2026},
journal = {Journal of Magnesium and Alloys},
volume = {16},
number = {C},
keywords = {Simulation, Tool design, Large-casting, Automotive product},
url = {https://www.sciopen.com/article/10.1016/j.jma.2026.101982},
doi = {10.1016/j.jma.2026.101982},
abstract = {Mass production of large thin-walled castings such as lift gates may introduce additional challenges compared with a typical casting in terms of tool design and casting process design. Proper die thermal management yields a high production rate and optimal quality parts as well as improved die life. The geometry of parts, physical properties of alloys, feeding system design and process parameters all have their own influence on the overall success of part production. In this paper, some of the major challenges and recommendations to consider during the tool and casting process design for FAW Lift Gate, a large thin-walled casting, are highlighted.}
}