TY  - JOUR
AU  - Jin, Guoliang
AU  - Liang, Bin
AU  - Zhao, Rida
AU  - Bao, Keye
AU  - Pang, Shengyang
AU  - Hu, Chenglong
AU  - Li, Jian
AU  - Yan, Meng
AU  - Tang, Sufang
PY  - 2026
TI  - Exceptional long-duration ablation tolerance over 2500 °C of C/ZrC–SiC–Cu3Si–Cu interpenetrating composites
JO  - Journal of Advanced Ceramics
SN  - 2226-4108
AB  - The development of materials capable of withstanding long-term ablation above 2500  °C in an oxidizing atmosphere remains a critical challenge. Although conventional C/ZrC–SiC composites show promise for ultrahigh-temperature applications, they typically suffer from high ablation rates under prolonged exposure. To address this limitation, we fabricated novel C/ZrC–SiC–Cu3Si–Cu composites by infiltrating a Zr–Si–Cu ternary melt into carbon fiber-reinforced carbon aerogel (C/CA) preforms. This process resulted in the formation of a uniform, interpenetrating metal-ceramic matrix through the ceramization of CA accompanied by precipitation of Cu-containing phases from the melt. Relying on sweat gland-like channel migration heat dissipation and evaporative heat removal of metallic phases as well as mechanical denudation resistance and inhibition of oxygen diffusion by the Zr–Si–O layer, the composite exhibited exceptional long-term ablation resistance. After 1200 s of oxyacetylene ablation at a surface temperature of 2557–2600 °C, the composite exhibited ultralow mass and linear ablation rates of 0.0604 mg·cm−2·s−1 and 0.1808 μm·s−1, respectively, surpassing the benchmark performance of conventional C/ZrC–SiC as well as other reported ceramic matrix and ceramic-metal matrix composites under similar test conditions. Moreover, the composite demonstrated excellent mechanical properties, with a flexural strength of 194±7 MPa, a fracture toughness of 11.8±1.2 MPa·m1/2, and a work of fracture of 5315±1232 J·m−2, exceeding those of most reaction-melt-infiltration-derived C/ZrC–SiC. This favorable combination of ablation resistance and mechanical performance makes the composite a promising candidate for structural applications in extreme thermal-mechanical environments.
UR  - https://doi.org/10.26599/JAC.2026.9221334
DO  - 10.26599/JAC.2026.9221334