@article{Pan2026, 
author = {Tong Pan and Xuan Huang and Behnam Dashtbozorg and Siyu Sun and Yepeng Yang and Ke Ren and Artemis Stamboulis and Xiaoying Li and Kan Ma and Hanshan Dong},
title = {Novel surface engineering design enabled surface multifunctionalisation of metastable Ti–15–3 β-titanium alloy},
year = {2026},
journal = {Friction},
keywords = {Ti–15V–3Al–3Cr–3Sn (Ti–15–3), metastable β-titanium alloy, multifunctionalisation, wear resistance, antibacterial, catalytic ceramic conversion treatment (C3T)},
url = {https://www.sciopen.com/article/10.26599/FRICT.2026.9441262},
doi = {10.26599/FRICT.2026.9441262},
abstract = {The growing demand for high-performance and long-service components for challenging and resource-intensive applications has driven the development of high-strength metastable β-titanium alloys with multifunctional surfaces. In this study, a novel surface engineering strategy, termed integrated bulk heat treatment with surface functionalisation (IBTSF), is introduced. This approach combines bulk aging treatment with catalytic ceramic conversion treatment (C3T) incorporating Ag or Au, thereby simultaneously imparting surface multifunctionalities (high hardness, desirable tribological properties, and high antibacterial efficacy) while also enhancing the bulk mechanical properties. To this end, the metastable β-titanium-alloy Ti–15V–3Al–3Cr–3Sn (Ti–15–3) was selected as a representative alloy, and C3T was catalysed using either Au or Ag. Under a load of 20 N, the Au-catalysed C3T achieved near-zero wear and a low, stable coefficient of friction (COF) of ~0.3, owing to the formation of a lubricating tribo-film. In contrast, Ag-catalysed C3T maintained stable tribological performance up to a load of 10 N while delivering high antibacterial efficacies of 99.878% and 99.999% against E. coli and S. aureus within 3–6 h of contact, respectively, through passive Ag-ion release. Both treatments also enhanced the bulk tensile strength by approximately 50%, increasing from 872±39 to 1,280±40 MPa. This combination of exceptional wear resistance, potent antibacterial activity, and improved mechanical strength offers a promising and efficient pathway to surface multifunctionalising metastable alloys for long-service, high-reliability applications.}
}