TY  - JOUR
AU  - TAO, Ming
AU  - CAO, Zheng
AU  - ZHAO, Rui
AU  - LIU, Yulong
AU  - LI, Xibing
PY  - 2025
TI  - Influence of filled joints with different inclination angles on rock blasting fragmentation
JO  - Explosion and Shock Waves
SN  - 1001-1455
VL  - 45
IS  - 6
AB  - To understand the interaction between joints and blasting stresses and optimizing blasting parameters in jointed rock, the impact of different joint inclinations on blasting fragmentation was studied through a combination of tests and numerical simulations. In this study, a group of concrete model specimens containing joints with different angles was used in the blasting tests to investigate the effect of joint inclination on blast fragmentation. During tests, detonators were placed in vertical boreholes in the specimens and detonated, while high-speed camera was used to capture the fragmentation process. The dynamic responses of joint surfaces at different time intervals after detonation was observed, and blasting fragmentation distribution was extracted using image processing techniques. The effect of joint inclination on blasting fragmentation was analyzed. The propagation of stress waves and the evolution of strain fields within the specimens was obtained in finite element numerical simulations by using LS-DYNA. Experimental and numerical results indicated that the joints have a significant influence on the distribution of blasting fragmentation and the propagation of stress waves. The impact of the joints on the blasting performance was mainly attributed to the reflection of blasting waves from the joints, which was related to the deformation characteristics of the joints. With the increase of joint inclination, the blasting fragmentation initially decreased followed by an increase. The effective stress and peak particle velocity transmission in the joints decreased overall with the increase of joint inclination, but showed a rebound between 45° and 60°. This suggests approximately 45° is the most favorable condition for rock fragmentation under blasting. Moreover, the results obtained from numerical crack network reconstruction and image processing revealed that there was an upsurge in the occurrence of vertical cracks in the specimen as the joint inclination increased, while a decline was observed in the presence of horizontal cracks.
UR  - https://doi.org/10.11883/bzycj-2024-0414
DO  - 10.11883/bzycj-2024-0414