@article{Yao2026, 
author = {Shu Yao and Xiang Xu and Liying Chen and Dianguang Liu and Yongsheng Liu and Ke Ren and Yiguang Wang and Jinling Liu},
title = {Low-temperature formation of eutectic structures by reactive flash sintering of Al2O3–Y2O3 composites},
year = {2026},
journal = {Journal of Advanced Ceramics},
volume = {15},
number = {4},
pages = {9221268},
keywords = {mechanical properties, solid-state reaction, eutectic structures, reactive flash sintering (RFS), onset temperature},
url = {https://www.sciopen.com/article/10.26599/JAC.2026.9221268},
doi = {10.26599/JAC.2026.9221268},
abstract = {Reactive flash sintering (RFS) has garnered significant interest because of the simultaneous synthesis/reaction and sintering of multicomponent ceramic materials. While electric fields demonstrably accelerate reaction kinetics during RFS, the reciprocal effect of reactions on flash sintering (FS) remains unknown. In this study, the role of the solid-state reaction in the onset of FS was investigated using Al2O3–Y2O3 and Al2O3–Y3Al5O12 (YAG) as models. The results show that the onset temperature of FS of Al2O3–Y2O3 is 350 °C lower than that of Al2O3–YAG under a constant electric field of 1000 V/cm. This demonstrates that the solid-state reaction significantly reduces the onset temperature, likely by enhancing the electrical conductivity of the sample. Remarkably, Al2O3–YAG ceramic composites with fine eutectic structures were prepared by RFS-ed Al2O3–Y2O3 at a furnace temperature of 850 °C, which is far below the eutectic temperature. The resultant eutectic ceramics exhibited mechanical properties comparable to those of conventionally solidified counterparts. RFS is expected to be an energy-efficient and sustainable sintering technology to fabricate high-performance eutectic ceramics.}
}