@article{Yavari2025, 
author = {Shabnam Yavari and Merey Sembay and Yersaiyn Bushanov and Zhumabay Bakenov and Mehdi Shafiee and Gulnur Kalimuldina},
title = {Recycling Polyvinyl Chloride (PVC) Pipe Wastes into PVC/ZnO Nanofiber-Based Triboelectric Nanogenerators},
year = {2025},
journal = {Energy & Environmental Materials},
volume = {8},
number = {3},
keywords = {energy harvesting, motion sensors, piezoelectric zinc oxide, polyvinyl chloride (PVC), recycling, triboelectric nanogenerators},
url = {https://www.sciopen.com/article/10.1002/eem2.12884},
doi = {10.1002/eem2.12884},
abstract = {Recycling plastic waste into triboelectric nanogenerators (TENGs) presents a sustainable approach to energy harvesting, self-powered sensing, and environmental remediation. This study investigates the recycling of polyvinyl chloride (PVC) pipe waste polymers into nanofibers (NFs) optimized for TENG applications. We focused on optimizing the morphology of recycled PVC polymer to NFs and enhancing their piezoelectric properties by incorporating ZnO nanoparticles (NPs). The optimized PVC/0.5 wt% ZnO NFs were tested with Nylon-6 NFs, and copper (Cu) electrodes. The Nylon-6 NFs exhibited a power density of 726.3 μW cm−2—1.13 times higher than Cu and maintained 90% stability after 172800 cycles, successfully powering various colored LEDs. Additionally, a 3D-designed device was developed to harvest energy from biomechanical movements such as finger tapping, hand tapping, and foot pressing, making it suitable for wearable energy harvesting, automatic switches, and invisible sensors in surveillance systems. This study demonstrates that recycling polymers for TENG devices can effectively address energy, sensor, and environmental challenges.}
}