TY  - JOUR
AU  - Hua, Guoshuang
AU  - Fan, Xiaoqiang
AU  - Zhang, Zhongpan
AU  - Wu, Mengxue
AU  - Cai, Meng
AU  - Zhang, Yihan
PY  - 2026
TI  - High wear/corrosion resistance of PI coating: Exploration via interfaces, bonding, and structure
JO  - Friction
SN  - 2223-7690
SP  - 9441149
VL  - 14
IS  - 7
AB  - This study discusses the mechanism by which Ti3C2Tx MXene enhances the wear/corrosion resistance of polyimide (PI) coatings from the perspectives of interface interaction, bonding and filler structure. Despite the excellent performance of Ti3C2Tx MXene, its challenges in forming strong interface and strong bonding in PI limit its protection efficiency. To address this, we innovatively prepared amino-functionalized Ti3C2Tx nanoflowers (Ti3C2Tx@PEI) and uniformly dispersed them in the PI matrix as an enhancer. The results show that Ti3C2Tx@PEI achieves optimal protection of PI (the PI composite coating containing Ti3C2Tx@PEI nanoflowers (PMX–PI)). Under high loading, the wear rate of the PMX–PI composite coating is only 6.23×10−5 mm3·N−1·m−1. After the 4-week immersion test, the highest low-frequency impedance modulus (|Z|0.01Hz) value of 3.73×107 Ω·cm2, approximately two orders of magnitude higher than that of the PI, is maintained. The coating resistance (Rc) is 1.81×106 Ω·cm2, which is approximately 2.2 times greater than that of PI (8.07×105 Ω·cm2). According to Materials Studio (MS) calculations, Ti3C2Tx@PEI has the highest affinity for the PI precursor (polyamic acid, PAA), with an interaction energy of −21.41 kcal·mol−1. Additionally, the –NH2 groups in Ti3C2Tx@PEI are effectively utilized to form –CON– groups through dehydration condensation with –COOH groups in PAA at high temperature. These strong interactions and bonds promote uniform dispersion, filling the structural defects of PI.
UR  - https://doi.org/10.26599/FRICT.2025.9441149
DO  - 10.26599/FRICT.2025.9441149