@article{REN2025, 
author = {Jialin REN and Hongjie GUO and Wenxin LI and Guozhu LIANG and Sheng ZHAO},
title = {Design and experiment of adjustable Venturi tube for stepless automatic tank pressurization},
year = {2025},
journal = {Journal of Beijing University of Aeronautics and Astronautics},
volume = {51},
number = {5},
pages = {1684-1693},
keywords = {adjustable Venturi tube, profile design, tank pressurization, flow regulation, pressure regulation},
url = {https://www.sciopen.com/article/10.13700/j.bh.1001-5965.2023.0260},
doi = {10.13700/j.bh.1001-5965.2023.0260},
abstract = {The stable control of tank pressure is crucial in the pressurization system of spacecraft tanks. In this paper, an adjustable Venturi tube based on a special conical pintle was designed, which could maintain a good linear correspondence between the pintle displacement and the flow rate, thereby improving the regulation accuracy. A closed automatic pressurization experiment based on the principle of negative feedback, as well as a system control and data acquisition based on programmable logic controllers were developed. The automatic pressurization experiment was conducted successfully. The results show that a high-precision, continuous, and stable pressure regulation over a wide flow range is accomplished by the device, offering some references for the design and improvement of the flow regulation device in the pressurization system.}
}