TY  - JOUR
AU  - Wang, Yaya
AU  - Zhao, Zexu
AU  - Zhong, Jiang
AU  - Wang, Tao
AU  - Wang, Lei
AU  - Xu, Hanjiao
AU  - Cao, Jinhui
AU  - Li, Jinhao
AU  - Zhang, Guanhua
AU  - Fei, Huilong
AU  - Zhu, Jian
PY  - 2022
TI  - Hierarchically Micro/Nanostructured Current Collectors Induced by Ultrafast Femtosecond Laser Strategy for High-Performance Lithium-ion Batteries
JO  - Energy & Environmental Materials
SN  - 2575-0348
SP  - 969
EP  - 976
VL  - 5
IS  - 3
AB  - Commercial Cu and Al current collectors for lithium-ion batteries (LIBs) possess high electrical conductivity, suitable chemical and electrochemical stability. However, the relatively flat surface of traditional current collectors causes weak bonding strength and poor electrochemical contact between current collectors and electrode materials, resulting in potential detachment of active materials and rapid capacity degradation during extended cycling. Here, we report an ultrafast femtosecond laser strategy to manufacture hierarchical micro/nanostructures on commercial Al and Cu foils as current collectors for high-performance LIBs. The hierarchically micro/nanostructured current collectors (HMNCCs) with high surface area and roughness offer strong adhesion to active materials, fast electronic delivery of entire electrodes, significantly improving reversible capacities and cyclic stability of HMNCCs based LIBs. Consequently, LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode with Al HMNCC generated a high reversible capacity after 200 cycles (25% higher than that of cathode with Al CC). Besides, graphite anode with Cu HMNCC also maintained prominent reversible capacity even after 600 cycles. Moreover, the full cell assembled by graphite anode with Cu HMNCC and NCM523 cathode with Al HMNCC achieved high reversible capacity and remarkable cycling stability under industrial-grade mass loading. This study provides promising candidate for achieving high-performance LIBs current collectors.
UR  - https://doi.org/10.1002/eem2.12223
DO  - 10.1002/eem2.12223