@article{YAN2025, 
author = {Pan YAN and Qin LI and Xiao HUANG and Xiaoming GUO and Yihui WENG and Yancheng YOU},
title = {Friction and heat flux prediction of lift body under different gas models and slip boundary models},
year = {2025},
journal = {Journal of Beijing University of Aeronautics and Astronautics},
volume = {51},
number = {4},
pages = {1277-1291},
keywords = {hypersonic flow, lift body, slip boundary condition, equilibrium gas, heat flux, friction},
url = {https://www.sciopen.com/article/10.13700/j.bh.1001-5965.2023.0209},
doi = {10.13700/j.bh.1001-5965.2023.0209},
abstract = {In view of the friction and heat flux prediction problems in the hypersonic flows around a lift body, the influence of different gas models (perfect gas and equilibrium gas), slip boundary models (M-S and Le), and incoming flow conditions (height, Mach number, and wall temperature) on the prediction of friction and heat flux was studied with the developed third-order weighted essentially non-oscillatory scheme. Firstly, numerical simulation and analysis of double Mach reflection problem and typical hypersonic examples were carried out by different slip boundary models and gas models. The results show that high-fidelity gas models, slip boundary models, and high-precision schemes show better accuracy in the calculation of hypersonic problems. On this basis, numerical simulation and analysis of hypersonic flows around a lift body at different heights, Mach numbers, and wall temperatures are carried out. The effects of slip boundary models and gas models on the prediction of friction and heat flux are comprehensively analyzed. The results show that different gas models are quite different, and the equilibrium gas model gets lower temperature in the boundary layer, smaller thickness of the boundary layer, greater wall heat flux, and slightly larger friction coefficient and total drag coefficient. The difference between the two gas models increases with the increase in height. Under the perfect gas model, the total drag coefficient, position of the center of pressure, and heat flux distribution of different slip boundary models show greater difference, which increases with the increase in height. Under the equilibrium gas model, the results of different slip boundary models are similar.}
}