@article{Pan2023, 
author = {Xiaohuan Pan and Lifei Wang and Pengbin Lu and Hua Zhang and Guangsheng Huang and Liuwei Zheng and Bin Xing and Weili Cheng and Hongxia Wang and Wei Liang and Kwang Seon Shin},
title = {Unveiling the planar deformation mechanisms for improved formability in pre-twinned AZ31 Mg alloy sheet at warm temperature},
year = {2023},
journal = {Journal of Magnesium and Alloys},
volume = {11},
number = {12},
pages = {4659-4678},
keywords = {AZ31 Mg alloy sheet, Planar stretch forming, Planar stress states, Continuous dynamic recrystallization, {10-12} tensile twinning},
url = {https://www.sciopen.com/article/10.1016/j.jma.2022.11.010},
doi = {10.1016/j.jma.2022.11.010},
abstract = {To investigate the role of pre-twins in Mg alloy sheets during warm planar deformation, the stretch forming is conducted at 200 ℃. Results suggest the formability of the pre-twinned AZ31 Mg alloy sheet is enhanced to 11.30 mm. The mechanisms for the improved formability and the deformation behaviors during the planar stretch forming are systematically investigated based on the planar stress states. The Schmid factor for deformation mechanisms are calculated, the results reveal that planar stress states extremely affect the Schmid factor for {10-12} twinning. The detwinning is activated and the prismatic slip is enhanced in the pre-twinned sheet, especially under the planar extension stress state in the outer region. Consequently, the thickness-direction strain is accommodated better. The dynamic recrystallization (DRX) type is continuous DRX (CDRX) regardless of the planar stress state. However, the CDRX degree is greater under the planar extension stress state. Some twin lattices deviate from the perfect {10-12} twinning relation due to the planar compression stress state and the CDRX. The basal texture is weakened when the planar stress state tends to change the texture components.}
}