@article{Xu2024, 
author = {Jilei Xu and Jinhui Liu and Dong Guo and Mao Chen and Peixu Yang and Rongbin Li and Shaojun Zhang},
title = {Mechanism of slag pellets sticking on the wall of reduction pot in magnesium production by Pidgeon process},
year = {2024},
journal = {Journal of Magnesium and Alloys},
volume = {12},
number = {6},
pages = {2397-2412},
keywords = {Pidgeon process, Glaze, Ca12Al14F2O32, CaF2, Solid-liquid transition},
url = {https://www.sciopen.com/article/10.1016/j.jma.2022.10.016},
doi = {10.1016/j.jma.2022.10.016},
abstract = {In the preparation of magnesium by Pidgeon process, the phenomenon slag pellets sticking on the wall of reduction pot always appear, and the glaze sticking on the inner wall of the reduction pot is difficult to remove. The mechanism of this phenomenon is studied in this work by X-ray fluorescence spectrometer (XRF) measurement, electron probe microanalyzer scanning (EPMA) analysis, differential scanning calorimetry (DSC) analysis, and thermodynamic calculations. The main components of the glaze are MgO, Ca12Al14F2O32, CaF2, CaO, and a small amount of Ca4Si2O7F2. The solid-liquid transition temperature of Ca12Al14F2O32 and CaF2 is close to the production temperature of Pidgeon process, which leads to the bonding between the slag pellets and the pot wall. The loss of CaF2 in glaze layer will reduce the total amount of liquid phase and increase the temperature at which Ca12Al14F2O32 is completely transformed into liquid phase, which causes glaze layer sticking on the inner wall of the reduction pot.}
}