@article{CHEN2022, 
author = {Fenglan CHEN and Xin LIU and Shengnian TIE and Chang'an WANG},
title = {Preparation and Thermal Performance of Nano-Graphene Oxide/Mirabilite Composite Phase Change Materials},
year = {2022},
journal = {Journal of the Chinese Ceramic Society},
volume = {50},
number = {6},
pages = {1642-1651},
keywords = {modified nano graphene, improved Hummers method, mirabilite composite phase change materials, structure and thermal property, cycle stability},
url = {https://www.sciopen.com/article/10.14062/j.issn.0454-5648.20211153},
doi = {10.14062/j.issn.0454-5648.20211153},
abstract = {To solve the problem of the shortened cycle life of phase-change latent heat storage due to the large subcooling degree and serious phase stratification of mirabilite phase-change materials, a graphene oxide/mirabilite composite phase-change material (GO–MCPCM) was prepared with Na2SO4·10H2Na2CO3·10H2–NaCl phase-change composite as a matrix and graphene oxide (GO) as additives. The microstructure and properties of GO and GO–MCPCMs were characterized by scanning electron microscopy, transmission electron microscopy Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetry-Differential scanning calorimetry, respectively. The results show that the O/C ratio in oxidized graphene oxide is increased by 65.75%, the structural defect level is increased from 0.224 to 1.088, indicating that the oxidation–treated graphene has no agglomeration phenomenon and has good hydrophilicity and compatibility. The crystalline phase transition temperature of GO–MCPCMs is 23 ℃, the degree of subcooling reduces to 0 ℃, only sodium sulfate decahydrate releases heat, and the crystalline hydrate is Na2SO4·10H2O with a grain length of approximately 2 cm. The maximum latent heat of GO–MCPCMs crystallization at a mass fraction of 0.075% is 156.7 J/g, and the attenuation rate of the latent heat of GO–MCPCMs crystallization at a mass fraction of 0.075% is 4.3% after 500 solid–liquid cycles. Therefore, the addition of GO can improve the thermal stability of the mirabilite composite phase-change material, and graphene oxide/mirabilite composite phase-change material prepared has a good thermal cycle stability and a long service life.}
}