@article{YE2023, 
author = {Zibin YE and Mingyang ZHOU and Gaochang ZOU and Xiaofeng GU and Qiwen WU and Jiang LIU},
title = {Performances of Tubular Cone-shaped Anode-supported Segmented-in-series Solid Oxide Fuel Cells Prepared with Gel-casting Technique},
year = {2023},
journal = {Journal of Ceramics},
volume = {44},
number = {4},
pages = {761-768},
keywords = {solid oxide fuel cell, gel-casting technique, cone-shaped segmented-in-series, anode support},
url = {https://www.sciopen.com/article/10.13957/j.cnki.tcxb.2023.04.017},
doi = {10.13957/j.cnki.tcxb.2023.04.017},
abstract = {Tubular cone-shaped anode-supported segmented-in-series solid oxide fuel cells are prepared by using a water-based gel-casting technique with acrylamide as the monomer. In preparing the green body of the porous cone-shaped anode (NiO-YSZ) support, by using the gel-casting technique, the reaction temperature is set at 90 ℃, without the requirement of initiator and catalyst. Then, the green anode is prefired at 1200 ℃. An electrolyte (YSZ) film is coated on outside of the anode support by using dip-coating technique and the bilayer is co-sintered at 1400 ℃. A cathode (Ag-GDC) is applied on the electrolyte by using brush-painting, which is then sintered at 850 ℃. The as-prepared tubular anode-supported cell gives a peak power density of 693 mW·cm-2 at 800 ℃. The segmented-in-series two-cell-stack shows an open circuit voltage of 2.06 V and a peak power of 2.31 W at 800 ℃ with an area of 4.1 cm2.}
}