@article{YANG2023, 
author = {Huanyu YANG and Wenjing HUANG and Yihua LI and Xiaogang DUAN and Siyu KANG and Ziyi WANG and Xiaoyuan LUO and Mian JIANG},
title = {Design of citrus identification and picking based on the Raspberry PI platform},
year = {2023},
journal = {Journal of Central South University of Forestry & Technology},
volume = {43},
number = {8},
pages = {192-201},
keywords = {deep convolutional neural network (YOLOv4-tiny), Raspberry PI, manipulator kinematics, trajectory planning},
url = {https://www.sciopen.com/article/10.14067/j.cnki.1673-923x.2023.08.019},
doi = {10.14067/j.cnki.1673-923x.2023.08.019},
abstract = {ObjectiveBased on the Raspberry PI platform, a portable citrus intelligent recognition and robot picking system were designed to provide a theoretical and experimental basis for reducing labor force and mechanical intelligence in citrus picking.MethodThe citrus data set was made, and the deep convolutional neural network (YOLOv4-tiny) was used to verify the validity of the data set. Based on the Raspberry PI platform combined with YOLOv4-tiny, a citrus intelligent recognition system was designed. The kinematic model and trajectory planning function of the five-degree-of-freedom manipulator were established, and the Raspberry PI development board, a camera and a small five-degree-of-freedom robot were used for the intelligent identification and picking of citruses.ResultThe recognition rate of the two-dimensional coordinates of citruses by the deep convolutional neural network (YOLOv4-tiny) model was 98%. After embedding Raspberry PI, combined with the similar triangle calculation method of the distance between the target and camera, the three-dimensional coordinates of citruses can be accurately identified (-3.2, 19.7, 16). After driving the mechanical arm to the position coordinate, the gripper clamp was made and the citrus can be picked up. After a total of 80 times of adjustment, the best time of mechanical arm movement was 1 000 ms, the best time of picking the end of the gripper was 500 ms, and the average angle of picking the end of the gripper was -60 degrees, so that the picking speed was appropriate without jitter. 20 harvest tests were conducted, and the average successful capture rate reached more than 90%.ConclusionThe depth recognition and picking system based on the Raspberry PI platform can realize the recognition and accurate picking of three-dimensional coordinates of citruses, which provides a certain theoretical basis and experimental reference for intelligent citrus picking.}
}