@article{WU2024, 
author = {Sanzhen WU and Mingkun FANG and Xingliang WU and Guangfei GUO and Junhong WANG and Sen XU},
title = {Effects of temperature, particle size, and air humidity on sensibility of typical high-energetic explosives},
year = {2024},
journal = {Journal of Measurement Science and Instrumentation},
volume = {15},
number = {3},
pages = {408-416},
keywords = {temperature, particle size, high-energetic explosives, air humidity, critical reaction energy},
url = {https://www.sciopen.com/article/10.62756/jmsi.1674-8042.2024042},
doi = {10.62756/jmsi.1674-8042.2024042},
abstract = {The production and utilization of high-energetic explosives often pose a range of safety hazards, with sensitivity being a key factor in evaluating these risks. To investigate how temperature, particle size, and air humidity affect the responsiveness of commonly used high-energetic explosives, a series of BAM(Bundesanstalt für Materialforschung und-prüfung) impact and friction sensitivity tests were carried out to determine the critical impact energy and critical load pressure of four representative high-energetic explosives (RDX, HMX, PETN and CL-20) under different temperatures, particle sizes, and air humidity conditions. The experimental findings facilitated an examination of temperature and particle size affecting the sensitivity of high-energetic explosives, along with an assessment of the influence of air humidity on sensitivity testing. The results clearly indicate that high-energetic explosives display a substantial decline in critical reaction energy when subjected to micrometre-sized particles and an air humidity level of 45% at a temperature of 90 ℃. Furthermore, it was noted that the critical reaction energy of high-energetic explosives diminishes with an increase in temperature within 25 ℃-90 ℃. In the same vein, as the particle sizes of high-energetic explosives increase, so does the critical reaction energy for micrometre-sized particles. High air humidity significantly affects the sensitivity testing of high-energetic explosives, emphasizing the importance of refraining from conducting sensitivity tests in such conditions.}
}