@article{Mebdir Holi2022, 
author = {Araa Mebdir Holi and Ghufran Abd AL-Sajad and Narahari Narayan Palei and Asla Abdullah Al-Zahrani and Asmaa Soheil Najm},
title = {Enhancement in NO2 and H2-Sensing Performance of CuxO/TiO2 Nanotubes Arrays Sensors Prepared by Electrodeposition Synthesis},
year = {2022},
journal = {Nano Biomedicine and Engineering},
volume = {14},
number = {1},
pages = {7-14},
keywords = {CuxO/TiO2 heterostructure, Gas sensor, Nanotube arrays, Electrochemical deposition},
url = {https://www.sciopen.com/article/10.5101/nbe.v14i1.p7-14},
doi = {10.5101/nbe.v14i1.p7-14},
abstract = {The CuxO/TiO2 nanotubes arrays are fabricated in two stages. Firstly, TiO2-NTs are grown by the Ti-foil anodization process and then annealed for 2h at 500 ℃. Subsequently, CuxO thin film was deposited with different deposition times on the nanotubes by electrochemical cathodic reaction, then heated twice, once at 200 ℃ in the air and then at 300 ℃ in the closed furnace for 2 h, respectively. Pure-TNT and CuxO/TNTs heterostructure are characterized by XRD, FE-SEM, EDX, Hall effect, and as a gas sensor. Results show that the gas sensor (CuOx=1/TiO2 for NO2 and H2 gases) prepared at the time (1 min) is higher than the pure TiO2-NTs and also higher than Cux=2O/TiO2 which were synthesized at various times 3, 5, 7, and 10 mins.}
}