@article{Liu2019, 
author = {Huan Liu and JiXian Dong and XiYa Guo and RuiFan Yang and Hui Jing and XiaoJun Jiang},
title = {Design Method of Curved-bar Refining Plates for Disc Refiner},
year = {2019},
journal = {Paper and Biomaterials},
volume = {4},
number = {1},
pages = {40-47},
keywords = {design method, disc refiner, refining plates, curved bar},
url = {https://www.sciopen.com/article/10.26599/PBM.2019.9260006},
doi = {10.26599/PBM.2019.9260006},
abstract = {Straight- and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry. Theoretically, the curved-bar refining plate has a relatively uniform bar interaction angle, which indicates uniform refining effects. The bar angle of the curved bar was proposed and two typical curved-bar plates, the three-stage radial curved-bar plate and isometric curved-bar plate, were designed in this paper. The arc equations of the curved-bar center line and curved-bar edges were established and finally, the specific edge load (SEL) of the curved-bar plate was derived. The determination of bar parameters was discussed, which provides a theoretical basis for the design of curved-bar plates.}
}