AI Chat Paper
Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
{{expandStatus?'Exit ':''}}Advanced Search
Due to their outstanding anti-flashover characteristics, composite insulators have been extensively applied in power systems. A lot of research has investigated flashover characteristics of hydrophobic specimens with artificial water droplets. However, the phenomenon is not consistent with that of the contaminated composite insulators. On the test specimens covered with water droplets, there is no obvious leakage current before the flashover and no obvious relationship between flashover voltage and the conductivity of water droplets. On the contaminated composite insulator surface, there are short continuous arcs on the insulators before critical flashover, making insulators look like a luminous lantern. Considering that under these two conditions, the proportion of water along the insulation distance is different, the flashover characteristic of “dry band-water band” on a hydrophobicity surface is analyzed in the present study. The influence of the water band parameter (including length, width, and conductivity) as well as the length of dry band is studied. On this basis, the arc generation and development process of the surface covered with “dry band-water band” is analyzed. The research results improve the understanding of the flashover process on contaminated composite insulators.
L. Yang, F. Zhang, Z. H. Wang, X. L. Jiang, Y. P. Hao, L. C. Li, Y. F. Liao, and F. Z. Zhang, “Evaluation of wetting condition and its effects on pollution flashover voltage of aerodynamic insulators,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, no. 5, pp. 2875–2882, Oct. 2016.
Z. Yuan, Y. Tu, R. Li, F. Zhang, B. Gong and C. Wang, “Review on the Characteristics, Heating Sources and Evolutionary Processes of the Operating Composite Insulators with Abnormal Temperature Rise,” CSEE Journal of Power and Energy Systems, vol. 8, no. 3, pp. 910–921, May 2022.
X. D. Liang, Y. F. Gao, J. F. Wang, and S. H. Li, “Rapid development of silicone rubber composite insulator in China,” High Voltage Engineering, vol. 42, no. 9, pp. 2888–2896, Sep. 2016.
J. Wang, et al., “Metal particle contamination in gas-insulated switchgears/gas-insulated transmission lines,” CSEE Journal of Power and Energy Systems, vol. 7, no. 5, pp. 1011–1025, Sep. 2021.
X. D. Liang, Y. F. Gao, J. F. Wang, and S. H. Li, “Rapid development of silicone rubber composite insulator in China,” High Voltage Engineering, vol. 42, no. 9, pp. 2888–2896, Sep. 2016.
C. Y. Zhang, L. M. Wang, Z. C. Guan, and F. Z. Zhang, “Pollution flashover performance of full-scale ± 800 kV converter station post insulators at high altitude area,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, no. 3, pp. 717–726, Jun. 2013.
X. L. Jiang, S. H. Zhao, Y. B. Xie, Z. J. Zhang, and L. C. Shu., “Study on fog flashover performance and fog-water conductivity correction coefficient for polluted insulators,” IET Generation, Transmission & Distribution, vol. 7, no. 2, pp. 145–153, Feb. 2013.
C. Y. Zhang, J. Y. Hu, J. C. Li, D. Liu, L. M. Wang, and M. Lu, “Experimental study on the contamination deposition characteristics of insulators in a fog–haze environment,” IET Generation, Transmission & Distribution, vol. 12, no. 2, pp. 406–413, Jan. 2018.
F. Obenaus, “Contamination flashover and creepage path length,” Deutsche Elektrotechnik, no. 12, pp. 135–136, Jan. 1985.
R. Wilkins, “Flashover voltage of high-voltage insulators with uniform surface-pollution films,” Proceedings of the Institution of Electrical Engineers, vol. 116, no. 3, pp. 457–465, Mar. 1969.
R. Wilkins and A. A. J. Al-Baghdadi, “Arc propagation along an electrolyte surface,” Proceedings of the Institution of Electrical Engineers, vol. 118, no. 12, pp. 1886–1892, Dec. 1971.
L. He and R. S. Gorur, “Source strength impact analysis on polymer insulator flashover under contaminated conditions and a comparison with porcelain,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, no. 4, pp. 2189–2195, Aug. 2016.
Z. C. Guan, S. Z. Yu, and Z. D. Jia, “The pollution and hydrophobicity properties of RTV coating,” High Voltage Engineering, vol. 19, no. 4, pp. 28–32, Dec. 1993.
A. Bojovschi, W. S. T. Rowe, and K. L. Wong, “The influence of hanging water droplets on discharge activity, application to high voltage insulators,” Applied Physics Letters, vol. 98, no. 9, pp. 091504, Feb. 2011.
O. Fujii, K. Honsali, Y. Mizuno, and K. Naito, “A basic study on the effect of voltage stress on a water droplet on a silicone rubber surface,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 16, no. 1, pp. 116–122, Feb. 2009.
M. H. Nazemi and V. Hinrichsen, “Experimental investigations on water droplet oscillation and partial discharge inception voltage on polymeric insulating surfaces under the influence of AC electric field stress,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, no. 2, pp. 443–453, Apr. 2013.
Y. Liu and B. X. Du, “Energy eigenvector analysis of surface discharges for evaluating the performance of polymer insulator in presence of water droplets,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 21, no. 6, pp. 2438–2447, Dec. 2014.
T. Deng, X. Liang, Z. Su and J. Zhou, “Puncture phenomena and mechanism analysis of a RTV coated cap and pin insulators in a steep-front impulse voltage test,” CSEE Journal of Power and Energy Systems, vol. 7, no. 4, pp. 832–839, Jul. 2021.
O. Fujii, K. Honsali, Y. Mizuno, and K. Naito, “Vibration of a water droplet on a polymeric insulating material subjected to AC voltage stress,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 17, no. 2, pp. 566–571, Apr. 2010.
P. Bruggeman, P. Guns, J. Degroote, J. Vierendeels, and C. Leys, “Influence of the water surface on the glow-to-spark transition in a metal-pin-to-water electrode system,” Plasma Sources Science and Technology, vol. 17, no. 4, pp. 0450014, Aug. 2008.
Q. Hu, Q. Li, Z. Liu, N. Xue, J. Wang and M. Haddad, “Surface Charge Accumulation Characteristics on DC GIL Three-post Insulators Considering the Influence of Temperature Gradient,” CSEE Journal of Power and Energy Systems, vol. 9, no. 5, pp. 1926–1934, Sep. 2023.
D. C. Jolly, “Contamination flashover, part I: theoretical aspects,” IEEE Transactions on Power Apparatus and Systems, vol. PAS-91, no. 6, pp. 2437–2442, Nov. 1972.
Shkuropat, “Development of a discharge on a wet insulator surface with d.c,” N-Tekh. Inf. Byull. Leningrad Polytechnic Inst 1., 1957, pp. 41–51.
B. F. Hampton, “Flashover mechanism of polluted insulation,” Proceedings of the Institution of Electrical Engineers, vol. 111, no. 5, pp. 985–990, May 1964.
H. Nacke, “Stability of foreign layer discharges and theory of contamination flashover,” ETZ-A, vol. 87, pp. 577–585, 1966.
A. Ouis and S. Flazi, “DC flashover criterion and discharge elongation mechanism in an air–electrolyte interval,” IET Generation, Transmission & Distribution, vol. 9, no. 1, pp. 53–60, Jan. 2015.
214
Views
6
Downloads
2
Crossref
N/A
Web of Science
8
Scopus
0
CSCD
Altmetrics
This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
京公网安备11010802044758号