AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Submit Manuscript
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research paper | Open Access

Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances

Qi-Kun Fenga,1, Chang Liub,1, Dong-Li Zhanga( ), Yan-Hui Songa, Kai Suna, Hai-Ping Xuc, Zhi-Min Danga ( )
State Key Laboratory of Power System, Department of Electrical Engineering, Tsinghua University, Beijing, 100084, China
School of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an, 710054, China
Shanghai Engineering Research Center of Advanced Thermal Functional Materials, Shanghai Polytechnic University, Shanghai, 201209, China

Peer review under responsibility of The Chinese Ceramic Society.

1 Qi-Kun Feng and Chang Liu contributed equally to this work.

Show Author Information

Abstract

Polymers and composites with high thermal conductivity are promising yet challenging for the growing demand of thermal management in electrical and electronic equipment. Guided by the closest packing model, a multiscale filling Al2O3 strategy was designed and incorporated with epoxy resin (EP) to form high thermal conductive composites in this work. Epoxy composites with single filler loading were also prepared. The microstructures, thermal, rheological, and dielectric characteristics of the multiscale filling Al2O3/EP composites have been investigated. Compared with single-scale Al2O3 filled epoxy based composites, it is found that the multiscale filling Al2O3/EP composites exhibit higher thermal conductivity under the same filler loading of 50 vol %, which is attributed to the efficient heat conduction paths formed by appropriate multiscale fillers. Particularly, a remarkably improved thermal conductivity of 2.707 W m−1 K−1 was acquired in Al2O3/EP composites at filler loading of 50 vol% (5 μm Al2O3 (26.67 vol%), 30 μm Al2O3 (27.41 vol%) and 70 μm Al2O3 (45.92 vol%)), which is about 1300% higher than that of the pure epoxy resin. In addition, the dielectric constant of the Al2O3/EP composites were significantly improved while keeping the dielectric loss almost unchanged. The finite element simulation further verified the effectiveness of improving the thermal conductivity of materials in the heat dissipation of electrical equipment. Therefore, this research provides a simple strategy for manufacturing high thermal conductive composite materials with a wide range of potential applications as packaging materials.

References

【1】
【1】
 
 
Journal of Materiomics
Pages 1058-1066

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Feng Q-K, Liu C, Zhang D-L, et al. Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances. Journal of Materiomics, 2022, 8(5): 1058-1066. https://doi.org/10.1016/j.jmat.2022.02.008

1617

Views

41

Crossref

0

Web of Science

54

Scopus

Received: 17 November 2021
Revised: 23 January 2022
Accepted: 10 February 2022
Published: 18 February 2022
© 2022 The Chinese Ceramic Society.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).