Carbon footprint impact of waste sorting on the municipal household waste treatment system: A community case study of Hangzhou

Considering the pressing need to reduce carbon emissions, the environmental impacts of waste sorting and its influencing factors remain unverified across many practical scenarios. This study focused on separating perishable and residual waste in a community in Hangzhou, China, examining how waste sorting behavior affects the carbon footprint of subsequent waste treatment systems through a randomized tracking survey and life cycle assessment (LCA) method. The results indicated that the sorted waste treatment system could achieve net carbon emissions ranging from −139.92 to −254.03 kg CO₂ eq per day by integrating the anaerobic digestion of sorted perishable waste with the incineration of residual waste. In comparison to the conventional mixed incineration system, which had net carbon emissions between −56.37 and −115.46 kg CO₂ eq per day and generated 383 kWh/t of power, the carbon reduction benefits of the sorted system were considerably greater, by a factor of 2.2–2.5. Additionally, the average amount of recovered electrical energy (993 kWh/t) was also higher by a factor of 2.6. Therefore, source separation of waste significantly enhances energy recovery and carbon reduction in household waste treatment systems. In this research system, incineration power generation and oil recovery serve as the primary units for reducing carbon emissions, and the proportion of residual waste generated greatly influences the total carbon emissions of the sorted waste treatment system (p < 0.05). Consequently, increasing the percentage of classified residual waste and optimizing machine efficiency will increase the carbon reduction benefits of waste sorting and treatment systems. These findings provide crucial references and guidance for advancing carbon reduction and waste classification in municipal solid waste (MSW) management systems.