Journal Home > Volume 14 , Issue 1

Occupant behavior is an important factor affecting building energy consumption. Many studies have been conducted recently to model occupant behavior and analyze its impact on building energy use. However, to achieve a reduction of energy consumption in buildings, the coordination between occupant behavior and energy-efficient technologies are essential to be considered simultaneously rather than separately considering the development of technologies and the analysis of occupant behavior. It is important to utilize energy-efficient technologies to guide the occupants to avoid unnecessary energy uses. This study, therefore, proposes a new concept, "technology-guided occupant behavior" to coordinate occupant behavior with energy-efficient technologies for building energy controls. The occupants are involved into the control loop of central air-conditioning systems by actively responding to their cooling needs. On-site tests are conducted in a Hong Kong campus building to analyze the performance of "technology-guided occupant behavior" on building energy use. According to the measured data, the occupant behavior guided by the technology could achieve "cooling on demand" principle and hence reduce the energy consumption of central air-conditioning system in the test building about 23.5%, which accounts for about 7.8% of total building electricity use.

Publication history
Copyright
Acknowledgements

Publication history

Received: 31 July 2019
Accepted: 29 December 2019
Published: 03 February 2020
Issue date: February 2021

Copyright

© Tsinghua University Press and Springer-Verlag GmbH Germany, part of Springer Nature 2020

Acknowledgements

The work presented in this paper is financially supported by a strategic development special project of The Hong Kong Polytechnic University. The authors would like to sincerely thank the colleagues in CSO (campus sustainability office) and FMO (facilities management office) of The Hong Kong Polytechnic University for their essential supports in conducting the on-site experiments reported in this paper.

Return