Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
Poly (ethylene oxide) (PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries; however, they present limitations of low room-temperature ionic conductivity, and interfacial incompatibility with high voltage cathodes. Therefore, a salt engineering of 1, 1, 2, 2, 3, 3-hexafluoropropane-1, 3-disulfonimide lithium salt (LiHFDF)/LiTFSI system was developed in PEO-based electrolyte, demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage. We show, by manipulating the interaction between PEO matrix and TFSI−-HFDF−, the optimized solid-state polymer electrolyte achieves maximum Li+ conduction of 1.24 × 10−4 S cm−1 at 40 °C, which is almost 3 times of the baseline. Also, the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO4/Li and LiNi0.8Mn0.1Co0.1O2/Li (3.0–4.4 V, 200 cycles) based all-solid-state lithium batteries at 40 °C.
This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
Comments on this article