AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (4.2 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Achieving Synergistic Improvement in Dielectric and Energy Storage Properties of All-Organic Poly(Methyl Methacrylate)-Based Copolymers Via Establishing Charge Traps

Guanghu He1, Huang Luo1, Chuanfang Yan1, Yuting Wan2, Dang Wu3, Hang Luo2( ), Yuan Liu2, Sheng Chen1 ( )
Key Laboratory of Polymeric Materials and Application Technology of Hunan Province, College of Chemistry, Xiangtan University, Xiangtan 411105, China
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
Guangdong University of Petrochemical Technology, Maoming 525000, China
Show Author Information

Abstract

How to achieve synergistic improvement of permittivity (εr) and breakdown strength (Eb) is a huge challenge for polymer dielectrics. Here, for the first time, the π-conjugated comonomer (MHT) can simultaneously promote the εr and Eb of linear poly(methyl methacrylate) (PMMA) copolymers. The PMMA-based random copolymer films (P(MMA-co-MHT)), block copolymer films (PMMA-b-PMHT), and PMMA-based blend films were prepared to investigate the effects of sequential structure, phase separation structure, and modification method on dielectric and energy storage properties of PMMA-based dielectric films. As a result, the random copolymer P(MMA-co-MHT) can achieve a maximum εr of 5.8 at 1 kHz owing to the enhanced orientation polarization and electron polarization. Because electron injection and charge transfer are limited by the strong electrostatic attraction of π-conjugated benzophenanthrene group analyzed by the density functional theory (DFT), the discharge energy density value of P(MMA-co-PMHT) containing 1 mol% MHT units with the efficiency of 80% reaches 15.00 J cm−3 at 872 MV m−1, which is 165% higher than that of pure PMMA. This study provides a simple and effective way to fabricate the high performance of polymer dielectrics via copolymerization with the monomer of P-type semi-conductive polymer.

Electronic Supplementary Material

Download File(s)
eem-7-2-e12577_ESM1.docx (1.5 MB)
eem-7-2-e12577_ESM2.tif (994.7 KB)
eem-7-2-e12577_ESM3.tif (4 MB)
eem-7-2-e12577_ESM4.tif (4 MB)

References

【1】
【1】
 
 
Energy & Environmental Materials
Article number: e12577

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
He G, Luo H, Yan C, et al. Achieving Synergistic Improvement in Dielectric and Energy Storage Properties of All-Organic Poly(Methyl Methacrylate)-Based Copolymers Via Establishing Charge Traps. Energy & Environmental Materials, 2024, 7(2): e12577. https://doi.org/10.1002/eem2.12577

638

Views

3

Downloads

42

Crossref

44

Web of Science

43

Scopus

1

CSCD

Received: 04 September 2022
Revised: 28 November 2022
Published: 19 December 2022
© 2022 The Authors.

This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.