AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.6 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Lithium-Metal Free Sulfur Battery Based on Waste Biomass Anode and Nano-Sized Li2S Cathode

Pejman Salimi1,2 , Eleonora Venezia1,2, Somayeh Taghavi3, Sebastiano Tieuli3, Lorenzo Carbone1, Mirko Prato1, Michela Signoretto3, Jianfeng Qiu4, Remo Proietti Zaccaria1,4 ( )
Istituto Italiano di Tecnologia, via Morego 30, Genoa 16163, Italy
Department of Chemistry and Industrial Chemistry, University of Genova, via Dodecaneso 31 I-16146, Genoa Italy
CATMAT Lab, Department of Molecular Sciences and Nanosystems, Ca’ Foscari University Venice and INSTM Consortium, RU of Venice, Via Torino 155 30172, Venezia Mestre Italy
Department of Physics, Shaoxing University, Shaoxing 312000, China
Show Author Information

Abstract

The realization of a stable lithium-metal free (LiMF) sulfur battery based on amorphous carbon anode and lithium sulfide (Li2S) cathode is here reported. In particular, a biomass waste originating full-cell combining a carbonized brewer’s spent grain (CBSG) biochar anode with a Li2S-graphene composite cathode (Li2S70Gr30) is proposed. This design is particularly attractive for applying a cost-effective, high performance, environment friendly, and safe anode material, as an alternative to standard graphite and metallic lithium in emerging battery technologies. The anodic and cathodic materials are characterized in terms of structure, morphology and composition through X-ray diffraction, scanning and transmission electron microscopy, X-ray photoelectron and Raman spectroscopies. Furthermore, an electrochemical characterization comprising galvanostatic cycling, rate capability and cyclic voltammetry tests were carried out both in half-cell and full-cell configurations. The systematic investigation reveals that unlike graphite, the biochar electrode displays good compatibility with the electrolyte typically employed in sulfur batteries. The CBSG/Li2S70Gr30 full-cell demonstrates an initial charge and discharge capacities of 726 and 537 mAh g−1, respectively, at 0.05C with a coulombic efficiency of 74%. Moreover, it discloses a reversible capacity of 330 mAh g−1 (0.1C) after over 300 cycles. Based on these achievements, the CBSG/Li2S70Gr30 battery system can be considered as a promising energy storage solution for electric vehicles (EVs), especially when taking into account its easy scalability to an industrial level.

Electronic Supplementary Material

Download File(s)
eem-7-2-e12567_ESM.docx (3 MB)

References

【1】
【1】
 
 
Energy & Environmental Materials
Article number: e12567

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Salimi P, Venezia E, Taghavi S, et al. Lithium-Metal Free Sulfur Battery Based on Waste Biomass Anode and Nano-Sized Li2S Cathode. Energy & Environmental Materials, 2024, 7(2): e12567. https://doi.org/10.1002/eem2.12567

536

Views

4

Downloads

23

Crossref

24

Web of Science

25

Scopus

0

CSCD

Received: 24 August 2022
Revised: 26 November 2022
Published: 29 November 2022
© 2022 The Authors.

This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.